SmokinDodge12V

Does anyone where I could get a fass system without the pump I just need the wiring and hoses. Thanks

Diesel-Dan

Any FASS dealer can order up any part from our kit.

Hose

FL-1001 for 3/8"
FL-1002 for 1/2"

Both sold by the foot.


Wire Harness:

The one with the relay for 98.5-04.5 trucks -- WH-1002 (NOTE: you can get this harness to work with any application.)
The one without the relay for 94-98 and 05-07 Trucks -- WH-1001

SmokinDodge12V

Mostly I need the whole kit minus the pump for an 03.

Diesel-Dan

HPFP or FASS?

SmokinDodge12V

The pump came off a 150 series fass system but I just want to use the inline filter setup.

Diesel-Dan

Click here and check out page #6.....

That will give you every part used in a kit for your year truck. ALSO...for the fittings, RM-1002, bolts and such....use this mounting package part number:

MP-A9008

SmokinDodge12V

So will this MP-A9008 turn it into a HPFP from a FASS.
From the parts list I think this is all I will need.
THB 1001
WH 1002
PL 1001
PL 1003
DIPF 1001
FF 5079

Diesel-Dan

OK....SO you have a FASS. And you want to convert it to a HPFP? Im getting all turned around with this for some reason. There are ways to do this if you are not concerned about our wnty on the unit.

If you want the items for the HPFP, this is what you will need:

WH-1002
14' FL-1001
THB-1001
BHB-1001
MP-A9009

AND if you have the FASS...you can get the HPFP base and convert it with a part numbers:

AB-1001
OR-031 (O-ring)
6120 (Gasket)
PS-1004 Spring (18 PSI)

This is the adapter base for the HPFP and items to make it work. BUT i would suggest just selling the FASS and using some of that money buying a new HPFP with full wnty and such......

SmokinDodge12V

Is there anywhere I can look at a price breakdown for each part.

roverhybrids

you are over $200 retail for the listed parts