WS6HUMMER

What would you guys reccomend for my 00? The only major mod I have is a TST PM3.

R.T.D.H.S.P.

Hey just a quick question for you? In your sig you say intake duct removed. What exactly do you mean?

hic316

I have the 95, and it works great, especially if you are not going through the roof with mods. a little bit cheaper too.

WS6HUMMER

It's just the little duct that connects the air cleaner housing to the fender.

WS6HUMMER

I just wanted to make sure it would keep up with my TST PM3, what do you think?

newconcorddodge

I went with the 95 it works great and will keep up probably unless your putting on major hp mods.

JStull

I ran a 95gph pump on my '01 with smarty, comp and supermentals with no problems. I had it 3 years and I heard that the 150 gph pump required a suction tube mod. I had 1/2" plumbed in anyway but just to let you know that is what I heard.

I think the 95 is plenty for what you have. I never got below 12 psi with mine. It idled at 19 or 20 psi with a heavy spring in it.

Oh yeah and I had the pump only, not the filters so I went ahead and changed the stock plumbing from the fuel filter to the injection pump with -6 hose and fittings. It made no difference that I could notice in performance or fuel pressure. If I had to do it again, I wouldn't bother changing the lines from the filter to the injection pump. Just my $.02.

Later,
Jason

WS6HUMMER

Thanks guys, I decided to go with the 95 GPH.

Diesel-Dan

The:
150/95-1008
or
95/95-1008
or
HPFP-95-1003

....will be perfect for ya......