exhaust/stack questions
#1
Registered User
Thread Starter
Join Date: Jun 2008
Location: Roseburg Oregon
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
exhaust/stack questions
------
have some exhaust questions. I want either a full 5" exhaust or toying with stacks or single stack. would like some feed back on a full 5" compared to a single 5 or 5" stacks. I know the sound will be diff. but overall on EGT and throttle response and spool up. I have a full 4" now wondering what are some gains.
second question for you stack guys. or single stack guys. I have been looking at airflo.com and getting ideas. my question is when the pipe comes up through the bed how is the pipe held is it actually touching the bed as it comes up. my thoughts this would make a bad vibration. just wondering if anyone has pictures of there home made stacks and how it looks coming up through the bed.
have some exhaust questions. I want either a full 5" exhaust or toying with stacks or single stack. would like some feed back on a full 5" compared to a single 5 or 5" stacks. I know the sound will be diff. but overall on EGT and throttle response and spool up. I have a full 4" now wondering what are some gains.
second question for you stack guys. or single stack guys. I have been looking at airflo.com and getting ideas. my question is when the pipe comes up through the bed how is the pipe held is it actually touching the bed as it comes up. my thoughts this would make a bad vibration. just wondering if anyone has pictures of there home made stacks and how it looks coming up through the bed.
#2
Registered User
Join Date: Feb 2008
Location: live oak, ca
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
i ran a full 5in on my 12 valve for a while but it had the 2200 rpm drone really bad then i went to 2 5in stacks that i think sound a lot better and got rid of the drone, as far as vibrations go, the stack systems should be mounted solid to the bed with a piece of flex pipe between the exhaust system and the stack system
#4
Registered User
Join Date: Feb 2007
Location: Pasadena, MD
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
I did my single stack with a 1/2" piece of all thread from the top of the bed to the back of the stack and pulled the 90 snug against the bottom of the brace underneath the bed. even over bumps it wouldnt move. im deciding between the single stack and a 5in exhaust now... in the middle of fabbing my twins. still undecided.
Last edited by BigErksG2; 04-09-2009 at 08:50 AM. Reason: cuz
#5
my stacks are mounted to the bottom of the bed i built 1/4 inch l brackets and they work nice stacks dont move much at all, im also debateing on takeing my stacks off and putting 5 inch back under it
#6
Registered User
Join Date: Feb 2007
Location: Pasadena, MD
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
for me the issue is its so freaking loud with the stack when im into the throttle up a mountain with a trailer behind me. its deafening! the downpipe for the twins is 5 inches so i was thinking about running 5 all the way back to avoid all the ruckus. im a young guy but an amplified stereo cant even drown it out!
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jun 2008
Location: Roseburg Oregon
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
well I dont care about the sound much I dont tow much anymore. but have either one of you guys ran a straight through exhaust with your stacks. wonder how much this would help with drone. also I know most people dont like stack rain raps. and I have seen some pretty ugly ones are there any out there that are really slick looking with out the big ugly hinge sticking out.
#9
Registered User
Join Date: Feb 2007
Location: Pasadena, MD
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
mine was 3 inch downpipe to 5 inch flex and to the stack from there... no muffler. drill a small weep hole in the bottom of the 5 inch and rain water will drip out.
#11
Registered User
Thread Starter
Join Date: Jun 2008
Location: Roseburg Oregon
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
well I will probley be flush with top of cab. still toying with either single or dual stacks. I have noticed alot of kits for the single has a double bend once it goes through the bed. I dont want that I want a cleaner look with a straight pipe coming through the bed. I will probley just get 5" alum pipe because it is going to get coated black. to 5" through the bed 5" 90 elbo then 5" flex if run 5" as far as I can to just before the down pipe bends. with a 4 to 5" adapter. just havent seen a clean way for when the pipe comes through the bed are there a adapter/bracket plate that I can get? also what is the best style of bracket to secure pipe against the bed wall.
Thread
Thread Starter
Forum
Replies
Last Post
itr.#1446
NJDTR #37
2
12-07-2009 11:36 PM
white250005
3rd Gen High Performance and Accessories (5.9L Only)
3
10-25-2007 10:19 PM
B.Law
3rd Gen High Performance and Accessories (5.9L Only)
16
04-22-2005 02:28 PM
Cat Cracker
3rd Gen Engine and Drivetrain -> 2003-2007
2
07-14-2003 12:17 PM