EGT install question
01-03-2008, 08:21 PM
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: San Antonio
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
EGT install question
I am putting my Autometer EGT/Boost guages back in as a double precaution, and because I can't trust my Commander because the boost only goes to 44psi.
Does anyone have the install instructions to the EGT guage. The wires from the probe connect to the posts, the question is there are two wires, a red and a black that are also connected to the guage (these are not the lighting wires). Is this another ground and the switched 12v? I thought only the transmission temp had a switched 12v lead?
Thanks for any help.
Does anyone have the install instructions to the EGT guage. The wires from the probe connect to the posts, the question is there are two wires, a red and a black that are also connected to the guage (these are not the lighting wires). Is this another ground and the switched 12v? I thought only the transmission temp had a switched 12v lead?
Thanks for any help.
Thread
Thread Starter
Forum
Replies
Last Post
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
14
11-20-2006 06:45 PM
svanni
3rd Gen High Performance and Accessories (5.9L Only)
3
09-08-2006 04:31 PM
CRXsi
3rd Gen High Performance and Accessories (5.9L Only)
26
05-17-2006 11:50 AM
Boss
3rd Generation Ram - Non Drivetrain - All Years
15
05-03-2004 09:14 AM