Edge EZ
#1
Chapter President
Thread Starter
Edge EZ
I bought my Edge used and didn't get the boost elbow with it. Can i make one and will it make a big difference?
Is it just a brass elbow with an orifice drilled in it?
thanks scotte
Is it just a brass elbow with an orifice drilled in it?
thanks scotte
#6
Registered User
Join Date: Jan 2005
Location: Hudson Valley N.Y.
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Scotte,
With your fueling situation (stock), simply clamping off the wastegate line would be all you need to do, or slip a .22 cal shell casing into the line to block it off.
You don't have enough fueling at this point to hurt your turbo from over spooling.
With your fueling situation (stock), simply clamping off the wastegate line would be all you need to do, or slip a .22 cal shell casing into the line to block it off.
You don't have enough fueling at this point to hurt your turbo from over spooling.
#7
Registered User
Join Date: Jul 2002
Location: Rising Sun, IN (out in the woods)
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mikelr
Scotte,
With your fueling situation (stock), simply clamping off the wastegate line would be all you need to do, or slip a .22 cal shell casing into the line to block it off.
You don't have enough fueling at this point to hurt your turbo from over spooling.
Scotte,
With your fueling situation (stock), simply clamping off the wastegate line would be all you need to do, or slip a .22 cal shell casing into the line to block it off.
You don't have enough fueling at this point to hurt your turbo from over spooling.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rockjeep73
Performance and Accessories 2nd gen only
7
03-25-2005 03:34 AM
Hoss
3rd Gen High Performance and Accessories (5.9L Only)
13
06-18-2004 06:14 PM
powerwagon440
Performance and Accessories 2nd gen only
3
01-20-2003 08:50 PM