Edge EZ - where is 3 prong data link on 01?
#1
Registered User
Thread Starter
Join Date: Mar 2003
Location: Central VT
Posts: 1,787
Likes: 0
Received 0 Likes
on
0 Posts
Edge EZ - where is 3 prong data link on 01?
my lift pump and fuel filter are gone (located rearward) and I still can't figure out where on earth this connector is...
http://xj.cdevco.net/uploadedimages/231191dscn0523.jpg
The hose is the fuel line, the red wire is the power to the lift pump. The split loom right there is for the map sensor.......
http://xj.cdevco.net/uploadedimages/231191dscn0523.jpg
The hose is the fuel line, the red wire is the power to the lift pump. The split loom right there is for the map sensor.......
#2
Registered User
look forward towarrd the injjection pump, sometimes the datalink is forward, but mosy commonly on 99-00 trucks.
But I've 01-01.5 forward too, There will also be a cap to remove on the datalink
But I've 01-01.5 forward too, There will also be a cap to remove on the datalink
#3
Registered User
Thread Starter
Join Date: Mar 2003
Location: Central VT
Posts: 1,787
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bob Wagner
look forward towarrd the injjection pump, sometimes the datalink is forward, but mosy commonly on 99-00 trucks.
But I've 01-01.5 forward too, There will also be a cap to remove on the datalink
But I've 01-01.5 forward too, There will also be a cap to remove on the datalink
Test drive time!
Thread
Thread Starter
Forum
Replies
Last Post
ChicagoSnow
Performance and Accessories 2nd gen only
9
08-27-2007 04:36 PM