Ian

I have a 2000 CTD. Do i need an edge comp specifically for the 2000CTD, or can i get any year comp and just find/make an adapter?
thanks a bunch
Ian

shoe

I am not sure what the year range is but the harness are differnt. would be hard to find.

dmanis

Just call edge 1.888.360.EDGE im sure some one there can fix you up

JDGnut

Ian, the harness the same for the 99-00's... 01-01.5 are the same.. and 2002... There are 3 different wiring harness.. What do you have.. and what are you needing, I might be able to help..
Bryan

Ian

i'm looking for a used edge comp for my 2000CTD, so i'm not looking to break the bank. I don't care what year the comp is for, as long as I can hook it up to my truck in some way or another

duallydave

hey ian,where in b.c. are ya from?im from vernon.i have a vanaaken plugnpower.im looking to get rid of.its not as powerful as a comp more like an ez.still a nice kick though.let me know if your interested.it says its for a 98-00 on the box but i used it on my 01 no problem.plugs directly on the ip.

KatDiesel

The MAP sensor voltages were changed for 2001+ . So its best if you find a 98.5 to 2000 box, just make sure it has the right plug for the 2000.

CTD NUT

You can buy the adaptor for the 98.5 - 00 Comp that lets you plug into the 00 harness if the used Comp you find does not have it. When you buy a new 98.5 - 00 Comp it comes wired with the connector to plug into the 98.5 - 99 MAP and includes the adaptor to plug into the 00. These guys are right, though.....you cannot use a 01 and later Comp as it is programmed to operate with a different MAP voltage and will not operate properly in a 00 and down CTD. You must get the 98.5 - 00 Comp.

Ian

hey, thanks guys, thats the info that I was looking for.

Duallydave - I'm from Maple Ridge in the lower mainland. how many hp/torque on the van aaken and how much would ya let go of it for?
Cheers,
Ian