Edge chip worth it or not
#1
Registered User
Thread Starter
Join Date: Aug 2008
Location: Illinois
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Edge chip worth it or not
Being a rookie when it comes to chips I am leaning on buying the Edge Juice with attitude but have read a lot of mixed opinions about the product. Other than an intake, 4" exhaust, and fuel pressure gauge I'm stock. Looking to bump up some power but keep it real. As a farm truck I don't want to get carried away mainly because I rebuilt the rearend at 70,000 and the auto trans at 90,000 being bone stock. I appreciate any advise and opinions. Thanks
#2
Registered User
Join Date: Apr 2007
Location: SLC, Ut. 4,200 ft.
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
If you go with the juice/attitude, I would strongly recommend a lift pump upgrade. Airdog or FASS. Also with the power j/a can deliever, that trans might not hold up long on higher setting then 2 unless your babyin it.. which kinda takes the fun out of it haha.
Torque converter and valve body would put ya in a pretty good spot for the trans though. Billet input even better. Still might go a little easy though.
If you like what you see from Edge, check out an EZ or comp box.
The EZ would be the best for a little extra power with your stock parts.
I ran my EZ with only intake and 4'' exhaust for 14 months just fine.. before I couldnt take the power bug on my back and started upgrading it all haha.
Hope this helps.
Ian
Torque converter and valve body would put ya in a pretty good spot for the trans though. Billet input even better. Still might go a little easy though.
If you like what you see from Edge, check out an EZ or comp box.
The EZ would be the best for a little extra power with your stock parts.
I ran my EZ with only intake and 4'' exhaust for 14 months just fine.. before I couldnt take the power bug on my back and started upgrading it all haha.
Hope this helps.
Ian
Thread
Thread Starter
Forum
Replies
Last Post
gergthegreat
3rd Gen High Performance and Accessories (5.9L Only)
8
12-30-2008 09:19 PM
bansh-eman
3rd Gen High Performance and Accessories (5.9L Only)
3
01-27-2008 02:48 AM
Elk_Hunter
3rd Gen High Performance and Accessories (5.9L Only)
11
10-24-2006 03:17 PM