JIT

I just purchased a 1995 12v and I need to get crackin on the cheap & easy mods. This will be a play toy and will never get hooked to a trailer. I just want it to go fast and pull hard. I am only familiar with the 24v VP44 trucks. Thanks

Josh

cumminsdriver635

Grind the fuel plate into a #0, loosen the starwheel, slide the AFC housing forward. That'll get ya started. Get some gauges, advance the timing, and buy a 4k to put in it, and that will help it out a lot too.

Diesel Dave2

Push the fuel plate full forward...

mr_diy

can you guys describe your recommendations a little better please? I just got a 96 3500 and am in the same boat as the poster.

thanks in advance (ps- mine WILL pull a gooseneck with about 6000k on it)

JIT

This thing is a DOG compared to my 2001. I need to wake this 12v up fast! Wheres the best place to get a 4gsk?

satburn

https://www.dieseltruckresource.com/...d.php?t=121533

Happy reading...

mr_diy

thanks, I subscribed to it for future reference.... back to searching all this crazy diesel speak.

3kgsk, afc kits, scotty 2... what the hell ever? LOL

JIT

Thank you!

dslpower

Before going too far on HP mods get a good valvebody and tourqe convertor for the tranny. You have to get the HP to the ground for it to be effective. If you do the 4gsk do the valve springs too.

OH BTW check the KDP!!! It may or may not have been taken care of.

mr_diy

thanks.. after the preventive stuff is done I'll do the tranny first. thank you but I'll only be going 3kgsk