Dually adapters, wheels, and fenders
#1
Muted User
Thread Starter
Join Date: Jun 2002
Location: Winder, GA
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Dually adapters, wheels, and fenders
I'm converting my dana 60 and dana 80 into single rear wheel axles by removing the spacers and using new wheels. I was wondering if anyone knew how much a set of 3500 adapters, fenders, and 6 wheels in average shape should sell for?
#4
Registered User
No spacers on the rear, you will have to use the dual wheel as an inner to line everything back up. I ran that way for a while. Also check the hub diameter of the front as some of the 3500 have a larger hub diameter. If you just take the outer rear wheels off you will have the same as single wheels just with the dual type wheels, I ran that way for a while, looked fine. Looked a lot more truckey.
Thread
Thread Starter
Forum
Replies
Last Post
chancey
3rd Generation Ram - Non Drivetrain - All Years
12
11-08-2010 07:18 PM
mcolectd
3rd Generation Ram - Non Drivetrain - All Years
1
09-19-2010 08:46 PM
griffy
3rd Gen High Performance and Accessories (5.9L Only)
59
03-24-2008 09:29 AM