Dual feed line revisited
#1
Registered User
Thread Starter
Dual feed line revisited
I havent heard much talk lately about the dual feed lines. Now that I have modded my FCA and gear pump cover I am wonderin if it is worth it?
Anybody care to speculate?
Anybody have any dyno proof?
Anybody care to speculate?
Anybody have any dyno proof?
#4
Registered User
Thread Starter
Ha...Ha
tcr and #2, I never really thought it would be worth it before, but now with the "new" diy pump mod I am kinda thinkin it may be. Then again that 300 bones could be save for that floor it stage 2.
I dont know, just explorein options.
Oh and #2, I am very curious what you do on the 21st.
Honestly I dont know that your PEAK power will be that much higher (could be wrong though) but I bet your curve is a lot flatter.
good luck either way
tcr and #2, I never really thought it would be worth it before, but now with the "new" diy pump mod I am kinda thinkin it may be. Then again that 300 bones could be save for that floor it stage 2.
I dont know, just explorein options.
Oh and #2, I am very curious what you do on the 21st.
Honestly I dont know that your PEAK power will be that much higher (could be wrong though) but I bet your curve is a lot flatter.
good luck either way
#5
Banned
Join Date: Apr 2006
Location: College Station, Texas
Posts: 3,141
Likes: 0
Received 0 Likes
on
0 Posts
Ha...Ha
tcr and #2, I never really thought it would be worth it before, but now with the "new" diy pump mod I am kinda thinkin it may be. Then again that 300 bones could be save for that floor it stage 2.
I dont know, just explorein options.
Oh and #2, I am very curious what you do on the 21st.
Honestly I dont know that your PEAK power will be that much higher (could be wrong though) but I bet your curve is a lot flatter.
good luck either way
tcr and #2, I never really thought it would be worth it before, but now with the "new" diy pump mod I am kinda thinkin it may be. Then again that 300 bones could be save for that floor it stage 2.
I dont know, just explorein options.
Oh and #2, I am very curious what you do on the 21st.
Honestly I dont know that your PEAK power will be that much higher (could be wrong though) but I bet your curve is a lot flatter.
good luck either way
seems my rail doesn't get along with my right foot.
#7
Banned
Join Date: Apr 2006
Location: College Station, Texas
Posts: 3,141
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Registered User
Thread Starter
I agree, I am thinkin about it, but I may try one of Floor its stage 2s first. I dont think I will need dauls for quite a while.
Plus I need head studs, a smarty, and some ladder bars before I get some sticks and a pump(s).
I will say this. I didnt change a thing on my truck except for the FCA and pump cover. Tst on tt05, 5/3 and mp8 on25-30%, just like when I pulled into the shop. And for the 20 minutes it ran after the diy cp3 mod the buttometer says that my tourque curve had flattened out quite a bit and my truck pulled like never before, it was pretty much a frieght trane, until it died. So it may be worth thinkin about.
Plus I need head studs, a smarty, and some ladder bars before I get some sticks and a pump(s).
I will say this. I didnt change a thing on my truck except for the FCA and pump cover. Tst on tt05, 5/3 and mp8 on25-30%, just like when I pulled into the shop. And for the 20 minutes it ran after the diy cp3 mod the buttometer says that my tourque curve had flattened out quite a bit and my truck pulled like never before, it was pretty much a frieght trane, until it died. So it may be worth thinkin about.
#12
new mods on the way for me DIY cp3, dual feed line "compliments of out-of-here" and predator/puck stack and walbro. truck should make alittle more than 450 now
I dont know if the dual feed line will help at all II says it adds 38hp by itself..who knows
I dont know if the dual feed line will help at all II says it adds 38hp by itself..who knows
#13
Registered User
Thread Starter
38hp?? I will believe it when I see the proof. I was just thinkin you might could run the tst a little higher and flatten that curve out even more. I am very interested in you dyno runs. Keep us posted.
Watch out with voodoo stuff man that bad joojoo.
Watch out with voodoo stuff man that bad joojoo.
#15
Registered User
Thread Starter
I think he had his doll out. My stinkin rail cap didnt show up cause fedex dropped the ball. I guess my truck can sit another day.
#2 if you gonna be voodooin something just stick me with the pins and leave my truck alone