Dual exhaust ????
#1
Chapter President
Thread Starter
Join Date: May 2002
Posts: 3,529
Likes: 0
Received 0 Likes
on
0 Posts
Dual exhaust ????
I want to hook up my stock exhaust to dual six inch stacks coming out the back. all of the kits I see are for a 4wd. Do they work on a 2wd or is there clearance issues? Can I just buy the piece where it comes over axle and splits? I have a line on the stacks and can handle the rest of the exhaust at a local shop. Its the split and bends over the axle I don't want to spend a wad of cash on since I am trying to do this on the cheap.
TIA
TIA
#2
Chapter President
Thread Starter
Join Date: May 2002
Posts: 3,529
Likes: 0
Received 0 Likes
on
0 Posts
See I can already get most of the pieces to make my own kit like this:
http://store.dieseltruckresource.com/mbt4tubadual.html
but why does it say 4x4 only?
http://store.dieseltruckresource.com/mbt4tubadual.html
but why does it say 4x4 only?
#3
Chapter President
Thread Starter
Join Date: May 2002
Posts: 3,529
Likes: 0
Received 0 Likes
on
0 Posts
https://www.dieseltruckresource.com/...d.php?t=183244
Go to post no#4. That's how I did it. I used stainless, added a 90 to the existing 4" underneath and cut the hole in the bed to tie in to the 6" cross tube. All polished stainless, all TIG welded. DIY, it's cheaper and more rewarding.
Go to post no#4. That's how I did it. I used stainless, added a 90 to the existing 4" underneath and cut the hole in the bed to tie in to the 6" cross tube. All polished stainless, all TIG welded. DIY, it's cheaper and more rewarding.
#4
Registered User
Join Date: Feb 2008
Location: seville ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
i am running stacks on my 99 go to chromedepot.com , i know them well and thats where i bought mine fom locally, they do ship and the kit is universal, i got 48" long miter cut stacks for $48 a piece, the whole kit ran me about $420 including tax
#7
Chapter President
Thread Starter
Join Date: May 2002
Posts: 3,529
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Chapter President
Thread Starter
Join Date: May 2002
Posts: 3,529
Likes: 0
Received 0 Likes
on
0 Posts
Upon further inspection it looks like the muffler is the divider, any kits with the divider as a y-pipe if I got the over the axle part I could get a divider maybe?
#13
Registered User
that rig looks familiar my exhaust is the 4" MBRP duals I bought here on the DTR talk to Lary & he'll set you up good. Only difference I would see between the 4wd & 2wd drive would be the bends around the rear drive shaft, longer for 4wd.
#14
Chapter President
Thread Starter
Join Date: May 2002
Posts: 3,529
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the having the pic on the site. I guess the longer bends will cause clearance issues. I wish someone would chime in that has tried it or has a set of duals on a 2wd. There has to be a reason they say 4wd only.
Thread
Thread Starter
Forum
Replies
Last Post
GotStacks
2nd Gen. Dodge Ram - No Drivetrain
3
05-23-2009 12:08 PM
DNRCustoms
1st Gen. Ram - All Topics
3
11-11-2008 08:25 PM