Draining Rail pressure?
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: Cypress Texas
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Draining Rail pressure?
You know I have seen alot of people talking about draining there rail with only a programer on settings such as extreme and causing a sputer or back fire.
I run a BDTD with Crazy Larry and have never experianced this and I am not easy on it at all. Am I the exception to the rule or do you think some people might need to change some fuel filters or what? I dont run the low end torq setting but that shouldnt really play a part in it at the top end huh?
I run a BDTD with Crazy Larry and have never experianced this and I am not easy on it at all. Am I the exception to the rule or do you think some people might need to change some fuel filters or what? I dont run the low end torq setting but that shouldnt really play a part in it at the top end huh?
#2
Registered User
I don't have the sputter or pop, I just notice the loss of power, well I guess more of lack of full power when under WOT about 17-1800 rpm. I was under the impression that my rail pressure was fine because I have watched my outlook and it showed everything fine. Once I started watching it on my commander, it was a whole nother story...
If I run no pressure then my rail stays pretty much ok, not at a full 24k but close enough.
It also looks like you are running a stock fuel set-up. My guess is you are perfectly fine and well within the limits of the stock pumps and injectors.
If I run no pressure then my rail stays pretty much ok, not at a full 24k but close enough.
It also looks like you are running a stock fuel set-up. My guess is you are perfectly fine and well within the limits of the stock pumps and injectors.
Thread
Thread Starter
Forum
Replies
Last Post
Striper
3rd Gen High Performance and Accessories (5.9L Only)
9
05-09-2008 03:13 PM
5.9Excursion
3rd Gen High Performance and Accessories (5.9L Only)
3
03-13-2008 10:56 AM
hoehand
3rd Gen High Performance and Accessories (5.9L Only)
15
03-24-2006 12:46 PM
mtl0727
3rd Gen High Performance and Accessories (5.9L Only)
1
11-05-2005 06:47 PM