Do you guys think these would rub
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
Do you guys think these would rub
Ive got a three inch lift in and 35's on stock wheels right now. Would a 10 inch wide wheel stick out too far an hit the body of my truck. It says that back space is -25 mm standard and im not exactly sure what the standard means. Here is a link to the wheels I found:http://cgi.ebay.com/ebaymotors/17x10...9183QQtcZphoto
Thanks for any help
Thanks for any help
#2
Registered User
Join Date: Sep 2003
Location: Austin, TX
Posts: 3,188
Likes: 0
Received 0 Likes
on
0 Posts
I think they will rub the back fender when turning. My 33 12.50 20s do rub because I have 20"x10" wheels w/ that type of backspacing, 20x9s wouldn't rub on my truck. I do have the 2" leveling kit as well. You might want to look at a 9" wheel. Good luck!
#6
Registered User
Thread Starter
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
Is there anyway to measure to see if they would fit without actually test fitting? With a 4.5 inch backspace they should stick out 3.75 inches farther than stock. Im not too worried about that because I plan on some pocket style fender flairs. Thanks
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
hudd1988
Towing and Hauling / RV
13
12-20-2014 08:56 AM
Shorts
3rd Generation Ram - Non Drivetrain - All Years
7
01-16-2011 04:05 PM
Onemoparnut
1st Gen. Ram - All Topics
45
01-14-2010 05:24 PM
tthomass
24 Valve Engine and Drivetrain
20
08-19-2005 09:35 PM
ddestruel
Performance and Accessories 2nd gen only
11
02-04-2005 07:06 PM