what do the oil pan bolts torque to on a 48RE auto
04-08-2006, 11:38 AM
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: Laquey MO
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
what do the oil pan bolts torque to on a 48RE auto
sorry for asking a dumb question.but i am getting ready to change the filter and fluid in my 48RE auto tranny. was wondering what the pan bolts torque to and with a stock tranny pan. about how much fluid they will hold.allso i am going to adjust the bands. this is its frist 30,000 mile service. is there any thing elese i should do or look for while i am in there.thanks for all your help. Mopar72 
04-08-2006, 05:25 PM
#3
Registered User
Thread Starter
Join Date: Mar 2006
Location: Laquey MO
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
hey J Body thanks for the info. allso is there anything while i have the pan off should i look for or do.allso that your name on moparts too. but thanks again Mopar72
04-08-2006, 06:06 PM
#4
Registered User
Join Date: Nov 2004
Location: Columbus Oh.
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Like he said 120 in. lbs / 13.6 n-m. The gasket is reuseable & if you don't a torque wrench just sung the bolts a little till you feel the gasket start to compress. You probably don't want to full with the bands unless its slipping & if it is let the dealer do it. Go with synthetic.
Thread
Thread Starter
Forum
Replies
Last Post
92'1stGen
3rd Gen Engine and Drivetrain -> 2003-2007
7
07-29-2009 12:23 PM
92'1stGen
3rd Gen Engine and Drivetrain -> 2003-2007
7
06-25-2009 08:17 AM
Roperteacher
3rd Gen Engine and Drivetrain -> 2003-2007
5
12-01-2007 09:28 AM
GlennRMK
24 Valve Engine and Drivetrain
2
03-31-2006 09:50 AM
