3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

DIY Tranny Flush?

Thread Tools
 
Search this Thread
 
Old 05-22-2008, 02:36 PM
  #1  
Registered User
Thread Starter
 
VaultRam's Avatar
 
Join Date: Jun 2006
Location: Arvada, CO
Posts: 330
Likes: 0
Received 0 Likes on 0 Posts
DIY Tranny Flush?

Ok I need to service the tranny ASAP and have a couple quick questions. Do I pull the cold return line off the tranny first and pump out the dirty fluid or do I pull the pan, change the filter, fill with 4+ quarts and then take the cold return line off and pump a gallon/add a gallon and repeat till clean fluid comes thru? I need the flush.....its been way overdue!
Old 05-22-2008, 02:49 PM
  #2  
Registered User
 
Ducman82's Avatar
 
Join Date: Jan 2008
Location: Kirtland AFB Albuquerque
Posts: 152
Likes: 0
Received 0 Likes on 0 Posts
id do the pan first. one of my buddys does his pan and filter, adds fluid, then, takes off the the hot or cold line. he made up hose that hooks to the cooler and on for the har line. then he takes 2 buckets, one with clean fluid that he attaces to the "suctions side" and the other bucket to the pressure side( hot or cold line) and turns on the truck. lets the trans pump do the work. pump out the old, suck in the new, and he just keeps going till nothing but clean fluid is pumped out. thats what i plan to do.
Old 05-22-2008, 02:57 PM
  #3  
Registered User
Thread Starter
 
VaultRam's Avatar
 
Join Date: Jun 2006
Location: Arvada, CO
Posts: 330
Likes: 0
Received 0 Likes on 0 Posts
I think its the COLD line but, where is your buddy hooking his hoses to, the connection at the tranny or the cooler?
Old 05-22-2008, 02:59 PM
  #4  
Registered User
 
Ducman82's Avatar
 
Join Date: Jan 2008
Location: Kirtland AFB Albuquerque
Posts: 152
Likes: 0
Received 0 Likes on 0 Posts
Cooler. i think he just hose clamps the hoses on the lines
Old 05-22-2008, 07:22 PM
  #5  
Registered User
 
67HotRod's Avatar
 
Join Date: Feb 2005
Location: Gretna, Louisiana
Posts: 1,178
Received 0 Likes on 0 Posts
I let the truck run with the cold trans line off dumping into a large pan. Keep pouring till the fliuid runs clean and then I drop the pan, change the filter and adjust the bands. JM2C
Old 05-23-2008, 12:22 AM
  #6  
Registered User
 
N.Johnson's Avatar
 
Join Date: May 2004
Location: B.C. Canada
Posts: 616
Likes: 0
Received 0 Likes on 0 Posts
Drop pan, change filter, leave bands alone, button up, re-fill. Start truck in neutral, idle a minute. Shut down pull the return line at the trans (rear most), start engine in neutral, have a helper add atf4 the dip stick as you watch the fluid coming out the return line. When you see a color change about 8 quarts, stop the engine and your good. I have done this twice. The BIGGEST thing is not to overfill. Top the tranny by the stick till it reads the low mark. Once the trans gets up to 190 the fluid expands and reads full. Fill a cold trans to the full mark and the fluid will cavitate (bubble). Just as bad as under-filled.
Old 05-23-2008, 02:17 AM
  #7  
Registered User
 
67HotRod's Avatar
 
Join Date: Feb 2005
Location: Gretna, Louisiana
Posts: 1,178
Received 0 Likes on 0 Posts
Originally Posted by N.Johnson
Drop pan, change filter, leave bands alone, button up, re-fill. Start truck in neutral, idle a minute. Shut down pull the return line at the trans (rear most), start engine in neutral, have a helper add atf4 the dip stick as you watch the fluid coming out the return line. When you see a color change about 8 quarts, stop the engine and your good. I have done this twice. The BIGGEST thing is not to overfill. Top the tranny by the stick till it reads the low mark. Once the trans gets up to 190 the fluid expands and reads full. Fill a cold trans to the full mark and the fluid will cavitate (bubble). Just as bad as under-filled.
Curious, why leave the bands alone?
Old 05-23-2008, 11:21 AM
  #8  
Registered User
 
DBLR's Avatar
 
Join Date: Jun 2006
Location: Forest Grove, Oregon
Posts: 2,423
Likes: 0
Received 1 Like on 1 Post
Band adjustment is not needed unless you have a problem. I've never adjusted the bands on any Dodger trans I've owned in 37 years and never had a problem by not doing so. BTW not adjusting them was pass on to me by several long time rebuilders who are customer oriented and not money hungry.
Old 05-23-2008, 10:09 PM
  #9  
Registered User
 
dozer12216's Avatar
 
Join Date: Dec 2007
Location: North Carolina or Kentucky. Take your pick
Posts: 2,738
Received 0 Likes on 0 Posts
Don't know what you've been servicing. Seen plenty Diesel Auto's that use up KD band. Mine was down to welds on flex band and out of adjustment by nearly 1/2 inch. the Dodge take on trans fuild change is complete fluid change is not needed for most part. Following their milage recomendations will have fluid and filter changed before fuild goes bad. Simple 4-6 qts changed will restore ATF + 4 to more than adequate condition. If fluid is in the brown color stage, more agressive fluid change may be in order.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CACalomino
3rd Gen Engine and Drivetrain -> 2003-2007
16
03-22-2010 06:35 PM
Sam Turner2
3rd Gen High Performance and Accessories (5.9L Only)
8
11-18-2008 10:17 AM
grantx5
Towing and Hauling / RV
7
01-05-2008 06:56 AM
LFD2037
3rd Gen Engine and Drivetrain -> 2003-2007
4
11-08-2006 09:12 PM
subspd
3rd Gen High Performance and Accessories (5.9L Only)
3
08-27-2006 02:17 PM



Quick Reply: DIY Tranny Flush?



All times are GMT -5. The time now is 05:05 AM.