3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Diesel-Dan FASS Help.....Truck is down

Old 12-21-2008, 07:15 AM
  #1  
Registered User
Thread Starter
 
Jason_K's Avatar
 
Join Date: Jun 2006
Location: Central Pennsylvania
Posts: 761
Likes: 0
Received 0 Likes on 0 Posts
Diesel-Dan FASS Help.....Truck is down

dan,

my FASS HPFP took a dump on me. after work last night i got in the truck turned the key to the on position to let the grid heater warm up and had no sound coming from the pump. you know how loud these pumps are so i immediately noticed it. tried starting the truck and to my surprise it started right up and seemed to idle fine. left the parking lot and thats when it started missing real bad and stalling out on me. i pulled over on the side of the road and called my old man to come out and give me a hand (it was 1230am at this point). we checked all the connections (including relay and fuse) and everything seemed good. gave the pump a few taps and tried starting it again. once again it started fine. we decided to go back to take another look at the pump, and that's when we found our problem. the wires going into the pump were partially frayed and were smoking pretty good. after we found the problem, we pulled the fuse, started the truck, hooked up a tow strap, and towed me home. truck in now sitting in the driveway.

i have a couple questions, (1) i purchased this pump roughly 3-4 years ago and at the time they came w/ a 6yr warranty.....is this covered under the warranty? (2) if it is, can i take it to the dealer that sold it to me and have him replace it.....or do i need to send it to you? (3) is it possible for me to upgrade it from a 95gph to a 150gph? i'm not sure of the model # but i originally bought it for my 2001 and ended up transfering it to my 2005 after i bought the correct wiring harness. i just want to say that i've always been very happy w/ this pump and your customer service is top notch. i would have prefered to keep this private and not put it on the forums, but you have mentioned before how you like to address everything publicly. thank you sir and i'm sorry for the long post

jason
Old 12-21-2008, 09:07 AM
  #2  
Registered User
 
Bswope's Avatar
 
Join Date: Jan 2006
Location: McConnellsburg, PA
Posts: 1,589
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by smoke19D
dan,

my FASS HPFP took a dump on me. after work last night i got in the truck turned the key to the on position to let the grid heater warm up and had no sound coming from the pump. you know how loud these pumps are so i immediately noticed it. tried starting the truck and to my surprise it started right up and seemed to idle fine. left the parking lot and thats when it started missing real bad and stalling out on me. i pulled over on the side of the road and called my old man to come out and give me a hand (it was 1230am at this point). we checked all the connections (including relay and fuse) and everything seemed good. gave the pump a few taps and tried starting it again. once again it started fine. we decided to go back to take another look at the pump, and that's when we found our problem. the wires going into the pump were partially frayed and were smoking pretty good. after we found the problem, we pulled the fuse, started the truck, hooked up a tow strap, and towed me home. truck in now sitting in the driveway.

i have a couple questions, (1) i purchased this pump roughly 3-4 years ago and at the time they came w/ a 6yr warranty.....is this covered under the warranty? (2) if it is, can i take it to the dealer that sold it to me and have him replace it.....or do i need to send it to you? (3) is it possible for me to upgrade it from a 95gph to a 150gph? i'm not sure of the model # but i originally bought it for my 2001 and ended up transfering it to my 2005 after i bought the correct wiring harness. i just want to say that i've always been very happy w/ this pump and your customer service is top notch. i would have prefered to keep this private and not put it on the forums, but you have mentioned before how you like to address everything publicly. thank you sir and i'm sorry for the long post

jason
Jason that sucks man, hope you get things figured out dude!!
Old 12-21-2008, 09:28 AM
  #3  
Registered User
Thread Starter
 
Jason_K's Avatar
 
Join Date: Jun 2006
Location: Central Pennsylvania
Posts: 761
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Bswope
Jason that sucks man, hope you get things figured out dude!!
thanks buddy, i'm not sweating it too much. it should be covered under the 6yr warranty and it will be an easy swap. i couldn't help but laugh when it happened because here's a link to how the rest of my weekend has gone https://www.dieseltruckresource.com/...d.php?t=227176
Old 12-21-2008, 10:55 AM
  #4  
Registered User
 
Bswope's Avatar
 
Join Date: Jan 2006
Location: McConnellsburg, PA
Posts: 1,589
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by smoke19D
thanks buddy, i'm not sweating it too much. it should be covered under the 6yr warranty and it will be an easy swap. i couldn't help but laugh when it happened because here's a link to how the rest of my weekend has gone https://www.dieseltruckresource.com/...d.php?t=227176
Daayyyummm, Glad everything is OK, hope you have a Merry Christmas!!

Take care,
Buddy
Old 12-21-2008, 10:55 AM
  #5  
Registered User
 
megacabdad's Avatar
 
Join Date: Jul 2008
Location: Erie, PA
Posts: 2,731
Likes: 0
Received 0 Likes on 0 Posts
I hope you get it fixed soon...

And have a garage to work in, because it is not very nice outside...
Old 12-21-2008, 11:05 AM
  #6  
Registered User
Thread Starter
 
Jason_K's Avatar
 
Join Date: Jun 2006
Location: Central Pennsylvania
Posts: 761
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Bswope
Daayyyummm, Glad everything is OK, hope you have a Merry Christmas!!

Take care,
Buddy
thanks Buddy, Merry Christmas

Originally Posted by megacabdad
I hope you get it fixed soon...

And have a garage to work in, because it is not very nice outside...
your 100% right, i don't want to be doing any kind of repairs outside!!! i do have a garage to work in and it shouldn't be more than a 20min job once i get a pump
Old 12-22-2008, 09:52 AM
  #7  
Registered User
Thread Starter
 
Jason_K's Avatar
 
Join Date: Jun 2006
Location: Central Pennsylvania
Posts: 761
Likes: 0
Received 0 Likes on 0 Posts
well this thread has a happy conclusion after a couple pm's with dan here's the reply i got from him:

You are a go....i got you on file...Marty will take good care of you.....AND actually i show this is a 150 GPH already by my notes.......

Ill see what he is willing to do (As sometimes dealers will take a pump out of stock to help out with wnty and ill replace with a new pump...so you can get a new pump today....but that is totally up to the dealer.)

Your wnty is good until 3-29-12

this was all done w/out them even looking at the pump....talk about an easy experience!!!

so if anyone's considering getting a FASS.....have no fear because it will be backed up 100%
Old 12-22-2008, 11:14 AM
  #8  
Registered User
 
megacabdad's Avatar
 
Join Date: Jul 2008
Location: Erie, PA
Posts: 2,731
Likes: 0
Received 0 Likes on 0 Posts
Glad to hear it.

Good customer service is becoming harder and harder to find these day's.
Old 12-22-2008, 12:46 PM
  #9  
madhat's monkey boy...
 
matego's Avatar
 
Join Date: Oct 2006
Location: Harrisburg PA
Posts: 1,795
Likes: 0
Received 0 Likes on 0 Posts
Good deal! Glad you got it taken care of. I feel your pain on the garage thing.... I at least have a good friend with a heated garage 2 miles away. the problem is they never break down in the garage
Old 12-23-2008, 06:03 PM
  #10  
Registered User
Thread Starter
 
Jason_K's Avatar
 
Join Date: Jun 2006
Location: Central Pennsylvania
Posts: 761
Likes: 0
Received 0 Likes on 0 Posts
i was feeling the pain today when i had to sit out in the snow to take the old pump off the truck. i should be able to pick the new one up tomorrow, then i'll have to sit in the snow to put it on too. it is nice to have a garage, but i guess it doesn't matter if you can't get the truck in there!!
Old 01-20-2009, 03:20 PM
  #11  
Registered User
 
Diesel-Dan's Avatar
 
Join Date: Sep 2003
Location: Plano, TX
Posts: 2,534
Likes: 0
Received 0 Likes on 0 Posts
everything work out?
Old 01-20-2009, 05:53 PM
  #12  
Registered User
Thread Starter
 
Jason_K's Avatar
 
Join Date: Jun 2006
Location: Central Pennsylvania
Posts: 761
Likes: 0
Received 0 Likes on 0 Posts
you bet dan, everything is working great!!! thanks again for all your help

jason
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Joe Mc
24 Valve Engine and Drivetrain
14
11-19-2006 06:25 PM
getblown5.9
Performance and Accessories 2nd gen only
19
10-17-2006 12:20 PM
snowrodeo
HELP!
3
10-02-2006 10:57 AM
snowrodeo
24 Valve Engine and Drivetrain
1
10-02-2006 08:38 AM


Thread Tools
Search this Thread
Quick Reply: Diesel-Dan FASS Help.....Truck is down



All times are GMT -5. The time now is 07:52 PM.