PDA

View Full Version : Deletes Plug Set


JAM
07-11-2011, 03:16 PM
I picked up a XRT/BLACKMAXX Plug Set and was just wondering who uses plugs after deletes are done?

Here is what came with the set:

4 each 2-pin males (3 EGT and 1 EGR TC Probe)
2 each 4-pin males (Bypass valve and Throttle Body)
2 each 4-pin females (Bypass valve and Throttle Body (if both aren't deleted))
2 each 6-pin males (O2 Sensors)
1 each 8-pin male (EGR Valve)

Thanks
JAM

cbrahs
07-11-2011, 03:24 PM
i am getting them for mine. will keep the plug pins from corroding just in case i ever have to re-install the goods for a dealer visit

JAM
07-11-2011, 03:27 PM
i am getting them for mine. will keep the plug pins from corroding just in case i ever have to re-install the goods for a dealer visit

That sounds like a great idea. For some reason I thought I had read something on here where someone had an issue plugging off something.

I will PLUG away. Thanks.

JAM

New2Diesel
07-11-2011, 06:27 PM
I used them. They are great! No problems here

ARTL
07-11-2011, 06:43 PM
I put them on mine, they work great, keeps all the water and salt out

JAM
07-11-2011, 08:18 PM
All good and very easy. Thanks all.

Fanged03
07-18-2011, 11:50 PM
I just got a set and I have 2 female 4 pins and 1 male 4 pin and didn't have one to put into the 2pin egr sensor in the cross over tube. Am I missing one?

Brent

JAM
07-19-2011, 05:32 AM
I just got a set and I have 2 female 4 pins and 1 male 4 pin and didn't have one to put into the 2pin egr sensor in the cross over tube. Am I missing one?

Brent

I also had 3 left over, not sure which ones but I will take a pic and post.

ZeroTolerance
07-19-2011, 07:26 AM
I need to order me some. I just ordered some Weathertech Digital Fit floor mats, need to wait a week or so to order the plug set. Wife would kill me if she really knew how much I've been spending on my truck in the past month [laugh]

JAM
07-20-2011, 07:35 AM
Here are the 3 that I have left over, or can not find and looked just about everywhere.

http://i247.photobucket.com/albums/gg134/jmedicus/IMG00072-20110719-1742.jpg

ZeroTolerance
07-20-2011, 09:14 AM
One of the 4-pins looks like it goes on the EGR Cooler and the other on the TV. (The actual devices NOT the harness) The extra's are for cali deletes.

JAM
07-20-2011, 04:20 PM
One of the 4-pins looks like it goes on the EGR Cooler and the other on the TV. (The actual devices NOT the harness) The extra's are for cali deletes.

Is there any way you can snap a quick pic of where the above are, I put a plug on everything I pulled off, if I had a plug to fit it. That would help me big time....trust me, I need it.

BTW, I drove 300+ miles picking up my son from the Airport in Charlotte, NC yesterday and got 18.4 mpg on the computer at avg speed of 75mph on #3 setting. I have 35" tires and still got this on the highest setting. I did set the programmer to 34.5" tires and that put my speed dead on with handheld GPS.

cbrahs
07-20-2011, 04:54 PM
Is there any way you can snap a quick pic of where the above are, I put a plug on everything I pulled off, if I had a plug to fit it. That would help me big time....trust me, I need it.

BTW, I drove 300+ miles picking up my son from the Airport in Charlotte, NC yesterday and got 18.4 mpg on the computer at avg speed of 75mph on #3 setting. I have 35" tires and still got this on the highest setting. I did set the programmer to 34.5" tires and that put my speed dead on with handheld GPS.

remember that one you were whining about on the intake horn that was a PAI to get the plug off? LOL

thats the TV (Throttle Valve). [guitar]

JAM
07-20-2011, 04:58 PM
remember that one you were whining about on the intake horn that was a PAI to get the plug off? LOL

thats the TV (Throttle Valve). [guitar]

yes i do....thanks...lol. but none of the above 3 remaining plugs fits that one...i tried them all...

cbrahs
07-20-2011, 05:04 PM
well you can do like i have. put them in the top drawer of your toolbox (aka junk drawer) and someday you will find a good use for them lol

ZeroTolerance
07-21-2011, 12:10 PM
I know one for sure goes on the EGR Cooler BODY, Not the harnesse. For Cali-deletes ONLY!

I will take pics tonight when I get home around 8pm CST

Fanged03
07-23-2011, 03:06 PM
Ok, Cali deletes make sense. Thats why I have a few left over. Whats the purpose of deleting the TV? I talked to George at 8Lugtruckgear.com, great customer service by the way, he is gonna send me a plug for the sensor that goes into the crossover egr pipe on my 2011. Can't beat a company that knows how to take care of a customer. I am in no way affiliated with the company just stating fact.

Brent

JAM
07-25-2011, 12:03 PM
Ok, Cali deletes make sense. Thats why I have a few left over. Whats the purpose of deleting the TV? I talked to George at 8Lugtruckgear.com, great customer service by the way, he is gonna send me a plug for the sensor that goes into the crossover egr pipe on my 2011. Can't beat a company that knows how to take care of a customer. I am in no way affiliated with the company just stating fact.

Brent

8 LUG just hooked me up as well. I believe they are going to post on here explaining what's up. They are an awesome company to deal with.

JAM

ZeroTolerance
07-25-2011, 12:11 PM
I am pretty sure it has to do with the TV closing when running at WOT or stomping it. The force at that time going through the TV can pull the TV closed is what I understand.