zack_76401

Any reccomendations on these injectors? Can I go straight for the 80 hp injectors instead of buying 25 or 40 horse injectors? What supporting mods will I need to run these injectors? I plan on new turbo just wondering if EGT's will be managable with these injectors. Are there better ones out there for the money?

92betsy

From what I've read SDX have a better spray pattern and they are alot cheaper than DDP injectors. http://www.southerndieselx.com/index...y&path=309_332 And I'm pretty sure you can just go for any size injector you don't have to step up on them for the bigger ones.

92smokin blacky

You can run bigger injectors just fine, but if you want more power with them then turn up your pump too. You might get a little hot with a stock turbo and bigger injectors an pump turned up. I think I'd turn up pump first then go with a better turbo then injectors. No point havin all the power and not bein able to use it cuz you cant keep it cool.

Jer12377

What size are DDP 80hp sticks (example-5x18=001272).? The chart on 1stgen.org http://www.1stgen.org/viewtopic.php?f=4&t=1363 only says they are 65lpm

zack_76401

Not sure on the size, they just say 80hp....Ill look into this.

zack_76401

Im going to turn up the pump, 3200RPM spring and a Denny T pin.

KD93

Zack, the first thing you should get is a pyrometer, (says he who doesn't have one... ) If you turn your pump up, it'd be a real good idea to keep an eye one your EGT's.

zack_76401

I have the pyrometer and boost gauge ordered....

KD93

Good work. Now you can go nuts!

JQmile

DDP's are expensive, but a very good injector, especially if you're into fuel economy and low smoke.

zack_76401

Im into daily driving, good milage low smoke and power...but arent we all?? How hot is too hot on a stock piston? 1200 sustained??

KD93

They reckon 1250° is the safest maximum sustained temp.