Danial Stern Harness.
11-17-2009, 10:21 PM
#3
Registered User
Join Date: Oct 2007
Location: Okotoks, AB
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
if you can't get a hold of him just use his diagram (it's somewhere on his site) and make your own.
if you have a bunch of wires and electrical stuff kicking around it shouldn't be too bad. but if you have to go out and buy it all it might get expensive - but then you will have plenty extra for any future wiring projects. the stuff comes in handy once in a while.
or maybe a local member can sell you some wire from some of his/her own reels . . .
the daniel stern harness kit is all the parts, but i believe you supply the wire and have to put it together yourself.
if you have a bunch of wires and electrical stuff kicking around it shouldn't be too bad. but if you have to go out and buy it all it might get expensive - but then you will have plenty extra for any future wiring projects. the stuff comes in handy once in a while.
or maybe a local member can sell you some wire from some of his/her own reels . . .
the daniel stern harness kit is all the parts, but i believe you supply the wire and have to put it together yourself.
11-18-2009, 08:16 AM
#4
If you were looking for the relay mod, you can find the info here too. Look under brighter headlights.
http://www.madelectrical.com/electrical-tech.shtml
Floyd
http://www.madelectrical.com/electrical-tech.shtml
Floyd
Thread
Thread Starter
Forum
Replies
Last Post
Diesel_Power_2
2nd Gen. Dodge Ram - No Drivetrain
21
05-10-2012 09:09 PM
Hummin Cummins
3rd Generation Ram - Non Drivetrain - All Years
10
03-24-2003 07:41 AM
