D350 Front Coil Spring Question
12-26-2006, 02:23 PM
#1
Registered User
Thread Starter
Join Date: Jun 2006
Location: Plain, TX
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
D350 Front Coil Spring Question
Searching the Forum I found 3 different part numbers below for the correct front coil springs for a D350. Mine are shot, and I want to make sure I get the correct replacement. Here are my findings:
Moog 5716
Moog 7226
Moog 7226s
According to the posts I read, the 7226 is a standard spring, and 7226s is a heavier duty spring. One post stated both 7226 springs were for gassers and the 5716 is the correct replacement for the extra weight of the Cummins. I just want to make sure I get the correct one the 1st time. Anyone know for sure?
Thanks!
Moog 5716
Moog 7226
Moog 7226s
According to the posts I read, the 7226 is a standard spring, and 7226s is a heavier duty spring. One post stated both 7226 springs were for gassers and the 5716 is the correct replacement for the extra weight of the Cummins. I just want to make sure I get the correct one the 1st time. Anyone know for sure?
Thanks!
12-26-2006, 02:45 PM
#2
http://www.partsamerica.com/ProductD...ype=59&ptset=A
the proper spring is the 5716S, contrary to a lot of posts it is not the 7226s, they are not right.
the proper spring is the 5716S, contrary to a lot of posts it is not the 7226s, they are not right.
12-26-2006, 06:28 PM
#3
how are the 5716s springs? do sit higher than the 7226s springs after a couple years?
Thread
Thread Starter
Forum
Replies
Last Post
Undertaker
3rd Generation Ram - Non Drivetrain - All Years
2
02-22-2010 10:48 AM
flynhigh205
Performance and Accessories 2nd gen only
7
02-26-2008 10:33 AM
Igor
3rd Gen High Performance and Accessories (5.9L Only)
6
12-19-2006 10:04 AM
Flashman
3rd Gen High Performance and Accessories (5.9L Only)
13
09-22-2006 03:48 PM