3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

cruse control surge

Thread Tools
 
Search this Thread
 
Old 06-13-2011, 12:35 AM
  #1  
Registered User
Thread Starter
 
frank compagnon's Avatar
 
Join Date: Jan 2006
Location: prince george, b.c. canada
Posts: 21
Received 0 Likes on 0 Posts
cruse control surge

when on cruse set on 100 to 120 km,s and i am going down a hill the truck sort-of bucks, a little surgy-bucky-jerky motion. go,s away when the cruse cuts back in. started doing this this year. no box ,pretty well stock. removed the performance enhancing stuff because of warrenty issues
Old 06-13-2011, 09:02 AM
  #2  
Registered User
 
Adaminak's Avatar
 
Join Date: Nov 2007
Location: Charleston, SC
Posts: 616
Received 1 Like on 1 Post
Pretty normal as the truck cuts fuel trying to stay at the programmed speed. I'd say you're lucky if yours just started, as mine's been doing it since I drove it off the lot. Chrysler cruise controls is just garbage.
Old 06-13-2011, 10:25 AM
  #3  
Registered User
 
jcismo1's Avatar
 
Join Date: Apr 2008
Location: Colorado
Posts: 133
Likes: 0
Received 0 Likes on 0 Posts
Same here, pretty much normal. I used to run a mileage max chip, it was worse with the chip. Still does it a little without it though.
Old 06-13-2011, 11:34 PM
  #4  
Registered User
 
DodgeChallenger's Avatar
 
Join Date: Apr 2010
Location: Salmon Arm, BC Canada
Posts: 322
Likes: 0
Received 0 Likes on 0 Posts
Me too frank on my 07 but not too bad. Just started after 3 years from new.
Old 06-14-2011, 07:52 AM
  #5  
Advocate of getting the ban button used on him...
 
rockcrawler304's Avatar
 
Join Date: Aug 2005
Location: Live Oak Texas
Posts: 5,081
Received 8 Likes on 8 Posts
Mine has done this from day one! It's never very bad but it is some thing I notice from time to time.
Old 06-14-2011, 08:53 AM
  #6  
Registered User
Thread Starter
 
frank compagnon's Avatar
 
Join Date: Jan 2006
Location: prince george, b.c. canada
Posts: 21
Received 0 Likes on 0 Posts
i guss what i need to know is if its the cruse controll unit failing or what ?. The truck still has extended warrenty and if the problem just started, is something wearing out, or did i just get lucky that it didnt happen from new, and have the dealer say ''thats the way it is''.
Old 06-14-2011, 09:08 AM
  #7  
Registered User
 
Adaminak's Avatar
 
Join Date: Nov 2007
Location: Charleston, SC
Posts: 616
Received 1 Like on 1 Post
Cruise isn't failing, it's just the way our trucks work. When you're going down a hill, there's very little fuel needed to maintain speed and the cruise control will completely release the pedal in an effort to keep you at your set speed. Of course, once it's off, the turbo dies and the truck slows down again, so the cruise control gives it a bit of fuel, slightly more than it needs to regain the 2mph of lost speed, which also spools the turbo, which now means you're going 3mph faster than you want, so the cycle repeats itself. It's worse on trucks with programmers and manual transmissions, especially if they've got slop in the drivetrain.
Old 06-19-2011, 01:32 PM
  #8  
Registered User
 
jpajax's Avatar
 
Join Date: Sep 2006
Location: Foothills of the Blueridge Mt. of N.C.
Posts: 226
Likes: 0
Received 0 Likes on 0 Posts
My son has a 07 and has that problem and according dodge it is a problem but they don't know how to fix it. It is funny that if they put the flight recorder on to check the problem (on board computer) it goes away so it must be in the programing of the cpu. There answer is live with it until they can figure it out. I have a 03 and no problem.
Old 06-21-2011, 08:35 PM
  #9  
Registered User
Thread Starter
 
frank compagnon's Avatar
 
Join Date: Jan 2006
Location: prince george, b.c. canada
Posts: 21
Received 0 Likes on 0 Posts
Originally Posted by jpajax
My son has a 07 and has that problem and according dodge it is a problem but they don't know how to fix it. It is funny that if they put the flight recorder on to check the problem (on board computer) it goes away so it must be in the programing of the cpu. There answer is live with it until they can figure it out. I have a 03 and no problem.
my 03 duelly didnt do it either.
Old 06-24-2011, 06:35 PM
  #10  
Registered User
 
T_rev's Avatar
 
Join Date: Sep 2010
Location: New Bethlehem Pa.
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
My Abs light was on and mine acted the same way.I fixed the abs sensor and it works great now.Apperently they read the speedoff the abs sensors.My truck is a 2003 with a quadzilla box on it.
Old 06-25-2011, 07:03 AM
  #11  
Registered User
 
critser660's Avatar
 
Join Date: Sep 2006
Location: Freeport, Ohio
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
What adaminak said, exactly. He described my situation perfectly. Another u-joint starting to go and I really notice it now, but it has been doing it since the beginning. The more you add to the pot, ie. tuner, heavier tires, a load behind you....the more it slows you and the harder your cruise fuels to get you caught up to speed. Just another example of a great engine in a crappy package.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
oldblues
2nd Gen. Dodge Ram - No Drivetrain
4
08-04-2007 11:17 PM
Evertight
24 Valve Engine and Drivetrain
7
02-19-2007 11:57 PM
alborada
1st Gen. Ram - All Topics
4
07-22-2006 12:20 AM
xyzer
3rd Gen Engine and Drivetrain -> 2003-2007
12
04-23-2005 01:06 AM



Quick Reply: cruse control surge



All times are GMT -5. The time now is 02:23 PM.