Cruse control problem
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: Foothills of the Blueridge Mt. of N.C.
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Cruse control problem
Well I guess I spoke to soon that had no problem. It just started that when I try to turn the cruse on the light on dash will come on then suddenly go off and cruse control doesn't work. Any suggestion on what to check?
#2
Registered User
Vaccum lines from the vaccum pump by the passenger side battery. The line will run to the dashpot under the drivers side battery. If you have had a leak for a while you may have burned up your pump.
#3
Registered User
Join Date: Nov 2006
Location: Vancouver, BC
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I would have the PCM checked out. My PCM has a problem & I'm waiting for a new one. It's only been 9 months, but Chrysler doesn't really care. The other thing you may want to check is the speedometer connection.
#4
Registered User
Thread Starter
Join Date: Sep 2006
Location: Foothills of the Blueridge Mt. of N.C.
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Pump working ok pulled the line off and it came on plug it up built up vacuum went off. Could not find a fuse marked cruse control but I guess if the light comes on would the fuse be bad. Is there a wire that goes to the back of speedometer?
Thread
Thread Starter
Forum
Replies
Last Post