cruize control
01-16-2009, 06:46 AM
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: north texas
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
cruize control
1998 1 ton nv4500. The cruize will shut off by itself after bout 10 minutes. The light in the guage cluster is still on and you can resume, but in about 10 or so minutes it will disengage. Short in wire or vacuum?
01-16-2009, 09:51 AM
#2
Registered User
Join Date: Mar 2003
Location: Northwest, Minnesota USA
Posts: 1,629
Likes: 0
Received 0 Likes
on
0 Posts
Inspect the servo unit under the driver side battery. They tend to corode. May be a bad connection.
Outside of that you may have a bad connection on the vss.
The most common problem is the brake light switch needs adjustment. If the brake pedal ratles a bit while driving it activates the drop off
Outside of that you may have a bad connection on the vss.
The most common problem is the brake light switch needs adjustment. If the brake pedal ratles a bit while driving it activates the drop off
Thread
Thread Starter
Forum
Replies
Last Post
Mountaineer
3rd Gen Engine and Drivetrain -> 2003-2007
2
10-04-2011 07:00 PM
