Cruise control / Heater vent selector
#1
Registered User
Thread Starter
Cruise control / Heater vent selector
I just replaced my VP44 and when I took my truck for a test drive I found two more problems
My cruise control will turn on but will not actuate.
My heater works but wont change from the defroster position regardless of my choice!
I cant find fuses for either of these systems, does anybody have any helpful information?
My cruise control will turn on but will not actuate.
My heater works but wont change from the defroster position regardless of my choice!
I cant find fuses for either of these systems, does anybody have any helpful information?
#2
Registered User
Join Date: Sep 2006
Location: Sonora, Ca
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
My guess is that while you were working on your VP you pulled loose your vacuum line from your vac pump. The reason I know this is because I did the same thing. Those two poblems both run off the vac pump. Should be a stiff plastic tube which plugs into a rubber tube at the pump.
#3
Yep, second the vacuum line. Just swapped my heater core and I had accidently messed up a vac line.....only defrost and nothing else. Quick fix, just replug and play....LOL. Good luck with it.
#6
Registered User
Join Date: Apr 2007
Location: Edmonton Alberta
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
My guess is that while you were working on your VP you pulled loose your vacuum line from your vac pump. The reason I know this is because I did the same thing. Those two poblems both run off the vac pump. Should be a stiff plastic tube which plugs into a rubber tube at the pump.
Trending Topics
#8
Registered User
Chris
Thread
Thread Starter
Forum
Replies
Last Post
leeboy
2nd Gen. Dodge Ram - No Drivetrain
5
02-21-2015 12:15 PM
EverydayDiesel
24 Valve Engine and Drivetrain
3
06-22-2007 08:11 AM