Couple questions-turbo/fuel system+Quad
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: MN
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Couple questions-turbo/fuel system+Quad
Have an 06 QC auto and have decided to go with the XZT and probably the boost fooler as well.
My question is what will the stock turbo handle for PSI and do I need to worry about draining the rail while towing 8500-10000 lbs in the hills?
I have gauges so I can monitor the boost and pyro levels but will the fooler and the xzt combo push the turbo too far under heavy loads?
Anything else I should take into consideration or look out for with this set-up? I do not have fuel pressure gauges but I can easily install them if recommended. Thanks for the info. -Jeremy
My question is what will the stock turbo handle for PSI and do I need to worry about draining the rail while towing 8500-10000 lbs in the hills?
I have gauges so I can monitor the boost and pyro levels but will the fooler and the xzt combo push the turbo too far under heavy loads?
Anything else I should take into consideration or look out for with this set-up? I do not have fuel pressure gauges but I can easily install them if recommended. Thanks for the info. -Jeremy
#4
The XZT is not even close to draining the fuel rail.
The only thing I have ever seen give us fits are very weak stock lift pumps. I would say that is the exception rather than the rule though.
The only thing I have ever seen give us fits are very weak stock lift pumps. I would say that is the exception rather than the rule though.
Thread
Thread Starter
Forum
Replies
Last Post
307Kenworth
2nd Gen. Dodge Ram - No Drivetrain
1
06-27-2011 08:23 AM
jmd025
Performance and Accessories 2nd gen only
4
10-04-2008 04:42 PM
6 is better tha
3rd Gen High Performance and Accessories (5.9L Only)
7
09-12-2007 10:16 PM
gman07
1st Gen. Ram - All Topics
3
04-15-2006 08:32 PM