confusion on Fuel press. guage.
#1
Registered User
Thread Starter
Join Date: Sep 2001
Location: Sweeny, Texas
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
confusion on Fuel press. guage.
I am confused. i have been reading about Fuel Pressure gauges, and I understand that the '01 doesnt have a hookup like the 98-00 do. is there something somewhere that describes the intall process, or can someone enlighten me?
thanks.
thanks.
#3
Re:confusion on Fuel press. guage.
Look on your injection pump. There is a schrader valve. The way you hook up a FP gauge to this is you need to buy a tapped banjo that will accept the port for the FP sender. They are only like $5 from Wildcat or Geno's. You unscrew the schrader valve and screw the tapped banjo in it's place. Screw the sender on to the banjo. And voila. Your done.
#5
Registered User
Join Date: Jan 2003
Location: yardley, PA
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Re:confusion on Fuel press. guage.
probably because you should upgrade all the banjo's at the same time to the larger ones instead of just the one..the kit probably contains all the needed banjo's.
#6
Re:confusion on Fuel press. guage.
It does replcae all the banjos with higher flow models. It upped my pressures overall by 1-2 psi. It was well worth the money. Make sure you get the replacement washers with the kit as well.
Thread
Thread Starter
Forum
Replies
Last Post
XChris1632X
Performance and Accessories 2nd gen only
6
02-24-2008 12:43 PM
Shanajustin
3rd Gen High Performance and Accessories (5.9L Only)
0
02-14-2008 08:42 PM
stock600
3rd Gen High Performance and Accessories (5.9L Only)
21
01-31-2008 12:03 PM
j
3rd Gen High Performance and Accessories (5.9L Only)
8
05-16-2007 08:11 PM