ls1joe

Anyone get crank position sensor codes, and injector circuit codes, p02149 at p0336. The codes happen with the box set to stock also.

3500lly

My crank position sensor code is always thrown. I'm getting rid of my edge though, it doesn't stack well with my bullydog.

ls1joe

I think I am going with something different also, I pull a 38ft race trailer and need a little more reliabilty.

skynyrd

i have never had my juice throw a code in my truck had it for about 6 or 7 months now. even with the ez hooked up as well i still don't ahve any problems being caused. what year truck do you have?

RamWheelsBy4

I ran the Juice/Attitude and then the HOT Juice/Attitude and EZ stacked for 8 or 9 months and never threw a code. No issues with anything. Was the most consistent, trouble free stack I have ran so far. I would talk with Edge about the issue. Could be module or wiring harness problem.

ls1joe

It is 04 3500 auto, and the problem happened a 8 months ago I called Edge they said they were aware of the problem, and they would send me a new one when the problem was addressed. I cleared the codes and no codes for 15,000 miles, and now it sets a code every 20 to 50 miles. I doesn't seem to matter what power level or engine temp. I think I am going to get the Bully Dog down loader for it. I like the Edge because of the internal guages and the GPS, but I don't want to deal with the problems.