24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

clutch advice

Old 09-14-2008, 08:09 PM
  #1  
Registered User
Thread Starter
 
xstroker_01's Avatar
 
Join Date: Jan 2008
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
clutch advice

have a 3500 five speed With an adge dragcomp clutch stop
Working. Would not go into gear at stop light started working just seconds later what could be wrong is it a bad clutch if so what would be the best clutch for the price? I've herd of westbend and valair. What should I use with that chip? Please help
Old 09-14-2008, 08:19 PM
  #2  
Registered User
 
louddodge's Avatar
 
Join Date: Jul 2007
Location: Texas
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Sounds like your hydrolics are going out or they are a little low on fluid. If it is your clutch I have a valair and it does ok. Will probably try Southbend next time
Old 09-14-2008, 08:32 PM
  #3  
Admin Team Leader
 
Lary Ellis (Top)'s Avatar
 
Join Date: May 2002
Posts: 15,514
Received 207 Likes on 158 Posts
Southbend on the clutch, don't go with a cheap one you will regret it.
Old 09-15-2008, 12:21 PM
  #4  
Registered User
 
SIXSLUG's Avatar
 
Join Date: May 2006
Location: Pacific NW, B'ham, Kalispell MT
Posts: 5,550
Received 148 Likes on 127 Posts
Southbend clutch and hydraulics.

Kurt
Old 09-15-2008, 05:06 PM
  #5  
Registered User
 
Brokenarrow's Avatar
 
Join Date: Sep 2008
Posts: 292
Likes: 0
Received 0 Likes on 0 Posts
I would go with a haisley street puller over southbend! And exspecially if you plan on doing any pullin at all!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dodgemaniac
Competition / Pulls / OffRoad
12
07-31-2008 10:15 AM
ryan466
3rd Generation Ram - Non Drivetrain - All Years
3
08-30-2006 10:10 AM
More Power
Performance and Accessories 2nd gen only
17
10-25-2003 03:51 PM
BigBully
1st Gen. Ram - All Topics
1
10-07-2003 10:58 PM
redramnc
12 Valve Engine and Drivetrain
6
08-06-2003 07:30 PM


Thread Tools
Search this Thread
Quick Reply: clutch advice



All times are GMT -5. The time now is 09:23 PM.