2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

cleaning evaporater

Old 06-13-2008, 11:56 AM
  #1  
Registered User
Thread Starter
 
99 24v's Avatar
 
Join Date: May 2008
Posts: 101
Likes: 0
Received 0 Likes on 0 Posts
cleaning evaporater

does anyone know how to clean the evaporater core on a 99 2nd gen? seems there was some info on here on the wiki or the tech facts section but i cant seem to find it. has anyone had any luck doing this? thanks
Old 06-14-2008, 06:17 AM
  #2  
Registered User
 
smokinram99's Avatar
 
Join Date: Dec 2007
Location: Lecco, Italy
Posts: 445
Likes: 0
Received 0 Likes on 0 Posts
also very interesting! I have a spray can with long hose of evaperetor cleaner but don't know how to use it...
Old 06-14-2008, 04:45 PM
  #3  
Registered User
 
ironbutt's Avatar
 
Join Date: Jan 2003
Location: Ormond Beach Fl 32176
Posts: 195
Likes: 0
Received 0 Likes on 0 Posts
Not shure how to do it either, but I had mine replaced last year at a dealer when my ac dropped dead on me on the road. the new drier was $115. compressor was $545, and the freon was 66 bucks. Was 1200 miles from home with the temps in the high 90's.. I had it fixed at the closest dealer who could do it. ( If Momma ain't happy, NO body's happy.)
Old 06-14-2008, 05:19 PM
  #4  
Registered User
 
Truck Girl's Avatar
 
Join Date: Sep 2007
Location: Cave Junction, OR
Posts: 70
Likes: 0
Received 0 Likes on 0 Posts
I'm pretty sure the only way to "clean" it would be to tear apart the dash. It is buried in there and very difficult to get to.
Old 06-15-2008, 02:18 AM
  #5  
Registered User
Thread Starter
 
99 24v's Avatar
 
Join Date: May 2008
Posts: 101
Likes: 0
Received 0 Likes on 0 Posts
i have no idea were i seen this at but it was on the internet somewhere. it involved using a mopar cleaner and and a process that dealers used in the service shop when using the cleaner. i know that they did it without removing the dash but i wonder how well it works?
Old 06-15-2008, 10:39 AM
  #6  
Registered User
 
Break Away's Avatar
 
Join Date: Feb 2005
Location: NC
Posts: 160
Likes: 0
Received 0 Likes on 0 Posts
If you remove the fan motor you can stick your hand in and remove any big pieces of trash that fell thru the cowl opening. I sprayed a bunch of Windex on the coils as best I could--let it set a few minutes--then rinsed with the water hose set on a low pressure. Make sure the drain tube is open and running properly or you will fill the floorboard with water. Also, I sprayed the rinse water in short bursts and let drain out before another spray.
Old 06-16-2008, 10:56 PM
  #7  
Registered User
 
kawi600's Avatar
 
Join Date: Nov 2005
Location: Boston, mASS
Posts: 2,910
Likes: 0
Received 1 Like on 1 Post
I have heard of evaporator treatment products you spray into the inlet to clean the junk off and inhibit corrosion. Check out some air conditioning service places.
Old 06-17-2008, 05:16 AM
  #8  
Registered User
 
smokinram99's Avatar
 
Join Date: Dec 2007
Location: Lecco, Italy
Posts: 445
Likes: 0
Received 0 Likes on 0 Posts
yes, I have a spray can of KOOL-IT by LUBEGARD, instruction says I have to spray into the evaporator....but where exactly? is there a source on the evap core where I can spray in?
Old 06-17-2008, 12:22 PM
  #9  
Registered User
 
Busboy's Avatar
 
Join Date: Aug 2007
Location: On the Farm, Manitoba
Posts: 3,901
Received 36 Likes on 32 Posts
My 2 cents is I believe the cleaners are really deodorizers. If your AC smells then you would use one. The only way I have ever cleaned the evap was to take it apart and remove the leaves and debris. I cannot see how they could remove leaves and dead bugs.
Old 06-18-2008, 10:10 AM
  #10  
Registered User
 
ramthis357's Avatar
 
Join Date: May 2008
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 99 24v
i have no idea were i seen this at but it was on the internet somewhere. it involved using a mopar cleaner and and a process that dealers used in the service shop when using the cleaner. i know that they did it without removing the dash but i wonder how well it works?
on tdr its there
Old 06-18-2008, 11:18 AM
  #11  
Registered User
 
smokinram99's Avatar
 
Join Date: Dec 2007
Location: Lecco, Italy
Posts: 445
Likes: 0
Received 0 Likes on 0 Posts
give us a link...
Old 07-17-2008, 07:46 PM
  #12  
Registered User
 
fireram's Avatar
 
Join Date: Feb 2004
Location: Ontario
Posts: 134
Likes: 0
Received 1 Like on 1 Post
A couple years ago i had an ac leak, put in the dye, could not find it anyware, it would last one summer, then back for another $100 recharge.. I had the system drained, took the dash out and the evaporator coil out, it was full of rotten leafs and crud, and the drain hole was also plugged with goo..... that in tern rotted a small pin hole in the coil, and leaked the R134..

So after having the dash out three times in a two week period, I got it back together, the tech put a vacume on the system overnight, no leaks, recharged it and it lasted for a summer then quit again...

I can not imagine how you would possible clean the coil, without taking the dash apart... If some one knows how, please post here a link...
Old 07-18-2008, 11:58 AM
  #13  
Registered User
Thread Starter
 
99 24v's Avatar
 
Join Date: May 2008
Posts: 101
Likes: 0
Received 0 Likes on 0 Posts
i removed the blower fan and the fan resister block. very hard get in thier with your hand. i took my air blow gun and stuck a piece of 3/8 fuel hose on it stuck it up in their and blowed out tons of crud. i then went to lowes and got a can of evaporater coil cleaner for air conditioners. sprayed the cleaner in the box and replaceced the fan and resister block. the condensation rinses the cleaner out the drain. seemed to help.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BearKiller
1st Gen. Ram - All Topics
15
07-13-2011 03:04 PM
TX Ram
24 Valve Engine and Drivetrain
2
02-26-2003 10:38 PM
ET RAM
12 Valve Engine and Drivetrain
2
02-24-2003 07:49 PM
turbob
Other
8
12-30-2002 02:02 PM
CRobey4393
12 Valve Engine and Drivetrain
3
10-04-2002 09:43 PM


Thread Tools
Search this Thread
Quick Reply: cleaning evaporater



All times are GMT -5. The time now is 07:54 AM.