1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Checking ball joints/wheel bearings. Questions..

Old 12-31-2006, 01:31 PM
  #1  
Chapter President
Thread Starter
 
89dieselkong's Avatar
 
Join Date: Nov 2005
Location: On the road...
Posts: 739
Likes: 0
Received 0 Likes on 0 Posts
Checking ball joints/wheel bearings. Questions..

I have heard a clunk in the steering when I turn the wheel at low speed (only on initial start up though) I lifted the truck to check ball joints and wheel bearings. There is no play at all on the up/down, push in/pull out part. When I wiggle side to side though, eveything on the steering assembly moves. including the steering shaft. The whole thing only moves maybe 1/8th of an inch total, but it was to my understanding that there should be NO movement at all. There is none from the wheel to the hub assembly, just the system moving. On the road she rides great. Runs straight with little vibration unless the road is bumpy. Just want to make sure. Thanks Eric
Old 12-31-2006, 01:54 PM
  #2  
Registered User
 
rconrad16's Avatar
 
Join Date: Dec 2006
Location: Southern NJ
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
I have the same exact problem Rusns straight no vibrations every things tight but when I turn tight right starting out on dirt or uneven roadI hear 1 or 2 loud clunks My truck is 2wd I also would be curious to any ideas
Old 12-31-2006, 04:23 PM
  #3  
Registered User
 
G1625S's Avatar
 
Join Date: Mar 2004
Location: Kirkwood, NY
Posts: 4,767
Likes: 0
Received 5 Likes on 5 Posts
My guess would be worn leaf bushings and/or stabaliaer bar bushings. Everything should move when you wiggle the tire since it's all attached A better way to look for bad tie rod ends is to have someone saw back and forth on the steering wheel (engine off, key on) while you run around and look at the TRE's and drag link ends.
Old 12-31-2006, 05:08 PM
  #4  
Registered User
 
flyingd's Avatar
 
Join Date: Nov 2003
Location: klamath falls, or
Posts: 321
Received 0 Likes on 0 Posts
I thought I was having issues with the front end, but it ended up being the molding aorund the wheel wells. The edge of the tire would rub or just catch it and make a thunk sound. It doesn't happen all the time, just depends on how I hit a bump and what angle I was turning at the time.
Old 12-31-2006, 05:32 PM
  #5  
Chapter President
Thread Starter
 
89dieselkong's Avatar
 
Join Date: Nov 2005
Location: On the road...
Posts: 739
Likes: 0
Received 0 Likes on 0 Posts
I figured everything was going to move I was just wondering if the system was supposed to have a little play in it or not...
Old 01-01-2007, 07:16 PM
  #6  
I was banned per my own request for speaking the name Pelosi
 
Redleg's Avatar
 
Join Date: Aug 2002
Location: Bristol Michigan
Posts: 1,908
Likes: 0
Received 0 Likes on 0 Posts
Check for a crack in the frame behind the steering gear box and check your u-joints in the front axle shafts on the 4x4. Also check your king pin bushings up top.
Old 01-07-2007, 06:47 PM
  #7  
REALLY old dog
 
old dog's Avatar
 
Join Date: Dec 2005
Location: Marion ,Michigan (Snow Belt Area)
Posts: 160
Likes: 0
Received 0 Likes on 0 Posts
WELL FRONTEND MY REBUILT LAST SUMMER , AND FRONTEND ALINGMENT,
i`VE HAD A LOUD CLUNK IN THE FRONT END ON FULL CRANK WHILE BACKING UP FOR YEARS, I THINK IVE COVERED MOST OF THE BASES, (ONES DESCRIBED IN THE FORUM) NEVER HAVE FOUND ANYTHING , NOR DID THE MECHANIC THAT ALIGNED THE FRONT END . fOR NOW I`M GOING TO WRIGHT IT OFF TO THE BODY TOURKING ,OR SOMETHING SIMULAR TO 4X4 WIND UP UNDER THE SAME CONDITIONS,(IT MIGHT BE CAUSED FROM HAVING A LOCKER REAR END )
REDLEG, look at what they did to me (while parked leagally) at an accident on Dec !5 on M115.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ben02ram
24 Valve Engine and Drivetrain
9
01-21-2012 12:02 PM
ROOSTER108BM
3rd Gen Engine and Drivetrain -> 2003-2007
2
07-17-2011 02:05 AM
firebill1720
3rd Gen Engine and Drivetrain -> 2003-2007
20
03-05-2010 09:23 AM
pullin hard
3rd Gen Engine and Drivetrain -> 2003-2007
8
04-07-2009 07:12 AM
njmaier
3rd Gen Engine and Drivetrain -> 2003-2007
15
07-26-2006 07:43 AM


Thread Tools
Search this Thread
Quick Reply: Checking ball joints/wheel bearings. Questions..



All times are GMT -5. The time now is 05:17 PM.