cconrad331

Pictures are a little blurry but what you think?



I'm not done with the polishing and have even thought of painting the intake white to match the truck but I couldn't wait any longer to try it out. The sound of the turbo whistle is unbelievable, without the silencer ring of course. The intake is 6" aluminum to a 5" adapter then into the stock turbo boot. Next step is the filter shroud, all aluminum.

4_play_ram

Nice job
very clean install I like it

na4now

Thats what I want to do with mine. Is that just a 6" alumunim elbow, with a bung welded in?

What filter?

Sinbadd

Looks good, just make sure that aluminum tube has no chance of contacting the positive battery terminal.

cconrad331

Na4now
yes it is an aluminum 6" elbow that I rolled down to fit a 5" piece of aluminum into it and then welded it up. Started with a 3/4" piece of plate and did some grinding on it to fit the 6" and then attached the air sensor to that. S&b 6" by 9" filter. Just over 120 for parts and a little time is all it takes.

haloman

Very Nice!

rockcrawler304

I like it.

+1 on the battery terminal contacting it though. Careful

cconrad331

Battery cable not as close as the picture makes it look....unless it wears a place on the cable and I hope the shroud I build helps support the intake a little better. Thanks for the opinions!!!

Justice4all

I like it! Nice and simple. Good clean look too.

DodgeCTD

This is exactly what my home made intake looks like except mine is a 5 inch. Works great and has alot of whistle

UnrulyNFS

That's really kewl! Nice work.

Patriot2500

Looks great!

roadhammer

Thats sweet looking nice job

jwb600

nice work! I built my own also and I like it alot better compared to the fitment of the tube on ones made by big companies. I run a 6" afe (stage 2 filter) and it whistles alot also

homewrecker

I was wondering what you where planning on doing with that filter!!