Check engine light on but no communication from ECM
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: North Carolina
Posts: 1,376
Likes: 0
Received 0 Likes
on
0 Posts
Check engine light on but no communication from ECM
My truck suddenly developed a Check Engine Light.
Performance has been reduced considerably but it's still driveable, and I towed my 30 ft boat for 200 miles with no problem.
Toke it to my mechanic, they plugged a Chrysler scan too and had no communication issues with ECM, then tried with the standard SnapOn and still could not communicate with engine.
They spent some time trying to figure it out then gave up.
I tried disconnecting batteries, etc but no luck at all, truck runs fine but lost some power. I cleaned MAP and IAT sensors, no luck.
Performance has been reduced considerably but it's still driveable, and I towed my 30 ft boat for 200 miles with no problem.
Toke it to my mechanic, they plugged a Chrysler scan too and had no communication issues with ECM, then tried with the standard SnapOn and still could not communicate with engine.
They spent some time trying to figure it out then gave up.
I tried disconnecting batteries, etc but no luck at all, truck runs fine but lost some power. I cleaned MAP and IAT sensors, no luck.
Thread
Thread Starter
Forum
Replies
Last Post
Timmay2
24 Valve Engine and Drivetrain
8
01-05-2020 04:54 PM
silverbullet02
3rd Gen Engine and Drivetrain -> 2003-2007
8
10-26-2007 08:24 PM
Jc9995
3rd Generation Ram - Non Drivetrain - All Years
0
11-29-2004 10:21 AM