capping the rail versus dual feed line
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
capping the rail versus dual feed line
I was wondering which would be better. I am getting info on both sides and I am wondering what all of you feel
Thanks
Kevin
Thanks
Kevin
#2
Banned
Join Date: Dec 2005
Location: Twin Falls, Idaho
Posts: 5,194
Likes: 0
Received 0 Likes
on
0 Posts
#4
Banned
Join Date: Dec 2005
Location: Twin Falls, Idaho
Posts: 5,194
Likes: 0
Received 0 Likes
on
0 Posts
#5
Banned
Join Date: Apr 2006
Location: College Station, Texas
Posts: 3,141
Likes: 0
Received 0 Likes
on
0 Posts
#6
Banned
Join Date: Dec 2005
Location: Twin Falls, Idaho
Posts: 5,194
Likes: 0
Received 0 Likes
on
0 Posts
#7
Banned
Join Date: Apr 2006
Location: College Station, Texas
Posts: 3,141
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Registered User
Join Date: Jan 2004
Location: Maritimes, Canada
Posts: 2,696
Likes: 0
Received 0 Likes
on
0 Posts
Will the 2007 6.7 relief valve fit the 5.9 rail?....It is good for a little higher pressure like 1600psi more or something close to that. When the manufacturer raises the pressure level...it must have some positive benefits. ks
#9
Banned
Join Date: Dec 2005
Location: Twin Falls, Idaho
Posts: 5,194
Likes: 0
Received 0 Likes
on
0 Posts
Kerry, I am not sure but I will ask!!
#11
Mine is capped cause I blew my RV and it was cheap and I was in a tight.
Cons, there is no cusion for you injectors. You can crack injectors with a RV in place but I guess it is less likely. With a cap you have no give. I assume this is common knowledge but that is the only cons I can see.
So far no problems with mine, but if I had one I would run a RV. Besides the hp, that is one reason I am set on Flux injectors, less likely to crack a tip.
Cons, there is no cusion for you injectors. You can crack injectors with a RV in place but I guess it is less likely. With a cap you have no give. I assume this is common knowledge but that is the only cons I can see.
So far no problems with mine, but if I had one I would run a RV. Besides the hp, that is one reason I am set on Flux injectors, less likely to crack a tip.
#13
Take the bolt out of the top, move the line out of the way, take the rv itself out, then replace with the "cap", the put the line back in place, and replace bolt on top.
If you need some more help shoot me a pm and I can give you my #. It is very simple.
If you need some more help shoot me a pm and I can give you my #. It is very simple.
#15
No, they do not reset themselves. My truck shut off and would not crank back up. At first I did not know that was the cause, but the blown rv was the problem.
Also if you have a rail guage, if you can t get pressure as high as it should then your rv could be goin south. If you are loosin power up top, another indication.
Also if you have a rail guage, if you can t get pressure as high as it should then your rv could be goin south. If you are loosin power up top, another indication.