The Yeti

the exahust is rotted off of my truck so i figured i'd up grade it to 4" or 5" at the same time, my issue is that all the exahust systems that i have found for dodge cummins are for 94 and newer.

i need the full turbo back because of the prevous owner hacked it to **** and thus it rotted off.

will a system for a 94 work for me? or will i have to get one custom made?

thanks

Christian

jimbo486

http://www.sourceautomotive.biz/shop/index.php should be able to get you set up with a 4" turbo back. or at least a 4" downpipe to get you started if you wanna build your own system. a system from a '94 would work. however, you'd need the cast elbow that comes off of the turbo for that downpipe to bolt up.

Crossy's son

www.stansheaders.com

makes the best 4" turbo back system for 1st gens.

Rick 12v CTD

how would their's be better than the one from source?

14racing

X2 on That!
I'm not sure about any of the other brands but the stans system is amazing. All mandrel bent and fits great. I don't see how anyone could make one that is any better.

Crossy's son

Source only makes 4" systems for 4x4 trucks with the T-case pipe.

Rick 12v CTD

this is true. I forgot about that and I got my 4" system from Source lol

peobryant

I talked to Rip when I was looking for a 4" exhaust and he told me he would "modify" the order so it would fit a 2wd.

pulltilbroke

I have no experiance with Rip's setup nor have I seen one in person but I havn't heard anything bad about his system. I do however have experiance with the Stans parts and can tell you that they are top notch quality, when I got mine I just ordered the DP and t-case pipe cause I was running a single stack setup at the time. I am now running the Stans stuff from the turbo to the back of the t-case with a homade muff delete with an old Flo-Pro 4" tail section made for a 1st gen.

The Yeti

thanks guys looks good again the issue is i'm in canada i have found a parts guy that can get me the bully dog turbo back exahust system for $550 any major conserns with regard to that system?'

also i really want to put stacks on the truck eventualy but if i'm doing the exahust now i might consider it. "pulltilbroke" how did you have your stack mounted in the bed?

james1

I visited Stan's shop:

https://www.dieseltruckresource.com/...ht=Phil+Fuller

I think it would be difficult to find nicer folks to do business with.

pulltilbroke

This is how my stack was mounted

The Yeti

great thanks, i was un sure how to mount them to the box

thanks for the pics

CB

COUNTRYBOY

Don't waste your money on the Bully Dog system, it's not a true 4" turbo back, go with either Rips or Stans.... I have the Pinnicle exhaust and it's not a true 4" either, it's 3.5 for the first 8" or so then 4" the rest of the way back. I have a Aero Turbine muffler "4040" and really like my set up...

dstad

I just got rips for christmass for my 91 d250. I love it, it cooled it don a crap ton, gave me a good deep sound and the drone was minimal, when you romp on it, it isnt obnxious. Def worth every penny. I would highly recomend it.