Can I stack with my Bully Dog?????
#1
Can I stack with my Bully Dog?????
Whats up fellas? I have the urge for a little more power and was wondering if I could stack somthing with my Bully Dog Extreme program. I have an 03 QC 4x4 with 48re Auto (Transgo & converter) Willeys Whistler and straight piped. I think everything else is stock (for now). I drive this daily and untill spring not pulling anything (even then it will only be a 4000lb boat on fairly flat ground). Thanks for any advice!
#4
Registered User
Join Date: Feb 2004
Location: Surrey BC Canada (it's not that bad eh!)
Posts: 3,640
Likes: 0
Received 0 Likes
on
0 Posts
Whats up fellas? I have the urge for a little more power and was wondering if I could stack somthing with my Bully Dog Extreme program. I have an 03 QC 4x4 with 48re Auto (Transgo & converter) Willeys Whistler and straight piped. I think everything else is stock (for now). I drive this daily and untill spring not pulling anything (even then it will only be a 4000lb boat on fairly flat ground). Thanks for any advice!
Also you could stack a pressure box to work with your BD. Popular ones are the MP8 or Dr Performance. I have a Quadzilla X2 which is great cuz it comes with a rail pressure gauge which is great since a rail gauge is a MUST have anytime you increase rail pressure.
Here's a write up the the *****'s Whistler:
http://wiki.dieseltruckresource.com/...lys_Air_Intake
#5
Thanks for the reply's. The *****'s Whistler is an air intake that whistles loud. Sounds like a jet engine spooling up for take off! It sounds sweet! The sound dosen't come through the exhaust but from the intake it's self.
I will look into a pressure box. What are the pros and cons to stacking it with the BD and how much pressure is too much pressure. Also my fuel system is stock is it going to support the stack?
I will look into a pressure box. What are the pros and cons to stacking it with the BD and how much pressure is too much pressure. Also my fuel system is stock is it going to support the stack?
#6
Registered User
Join Date: Feb 2004
Location: Surrey BC Canada (it's not that bad eh!)
Posts: 3,640
Likes: 0
Received 0 Likes
on
0 Posts
As long as you have a fuel pressure gauge to make sure your lift pump is okay, and a rail gauge after you add pressure you'll be okay.
26K or something is max rail pressure I think, I've only had my X2 maxxed out once and that was on the dyno. Don't addd pressure all the time, it's hard on your injectors.
Also before adding the stack make sure you have some upgraded fuel filters, 2 micron is best.
26K or something is max rail pressure I think, I've only had my X2 maxxed out once and that was on the dyno. Don't addd pressure all the time, it's hard on your injectors.
Also before adding the stack make sure you have some upgraded fuel filters, 2 micron is best.
Thread
Thread Starter
Forum
Replies
Last Post
CLeger67
3rd Gen High Performance and Accessories (5.9L Only)
2
04-07-2008 08:17 AM
calfroper
3rd Gen High Performance and Accessories (5.9L Only)
1
03-06-2007 11:56 PM
MoparRiggan
3rd Gen High Performance and Accessories (5.9L Only)
0
09-19-2005 08:19 PM
Bradleysram
3rd Gen High Performance and Accessories (5.9L Only)
9
01-20-2005 02:57 PM