Where can I get a boost elbow at?
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: Northeast, TX
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Where can I get a boost elbow at?
I was wondering what the boost elbow looks like to make the wastegate hold longer for more boost? I was wondering if I can go pick one up at the hardware store. Or can I put a turnbuckle on the wastegate? I have a '00 Auto w/ the stock HX turbo.
I know, I know, I will need a boost fooler too if I don't want to throw any codes, but I don't care if it throws codes, as long as it isn't hurting anything.
Appreciate any help,
JD
I know, I know, I will need a boost fooler too if I don't want to throw any codes, but I don't care if it throws codes, as long as it isn't hurting anything.
Appreciate any help,
JD
#2
Registered User
Join Date: Jan 2003
Location: yardley, PA
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Re:Where can I get a boost elbow at?
A boost elbow is a small brass elbow located on the lower front side of your turbo..it has a rubber hose attached to it...you use a turn-buckle if your boost elbow is hard-lined, meaning no rubber hose...i know on the 01' auto they r hardlined, not sure on the 00'...check out "wildcat diesel" in the "links" then "high-performance" section...they sell for like $30.00....i dont think u can buy at a hardware store though..One thing is, if it sets the overboost code I BELIEVE it also de-fuels with this code..meaning u will not run good at all becuase of lack of fuel..someone else will chime in to back me up on the overfuel thing though
#3
Registered User
Join Date: Feb 2003
Location: Laredo, Tx, 7 hours south of Dallas
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Re:Where can I get a boost elbow at?
The ECM compensates for boost over 20PSI by de-fueling the truck.
Even though running 25PSI, you might make less HP than at 19PSI. Clear as mud?
The boost fooler keeps the ECM thinking it's in the perfect Boost range for Full Fueling, which it will do.
I think I have a boost elbow sitting here, left over from my COMP box (I just pinched off the WG line). I can get it off my hands for cheap.
Merrick
Even though running 25PSI, you might make less HP than at 19PSI. Clear as mud?
The boost fooler keeps the ECM thinking it's in the perfect Boost range for Full Fueling, which it will do.
I think I have a boost elbow sitting here, left over from my COMP box (I just pinched off the WG line). I can get it off my hands for cheap.
Merrick
#5
Patron Saint of 1st gens
Join Date: Jun 2002
Location: British Columbia, Canada
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re:Where can I get a boost elbow at?
#6
Registered User
Thread Starter
Join Date: Nov 2003
Location: Northeast, TX
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re:Where can I get a boost elbow at?
[quote author=Bushy link=board=7;threadid=22618;start=0#msg211773 date=1069315229]
You can get a boost fooler here:
http://www.piersdiesel.com/
Bob.
[/quote]
I can't seem to find their fooler on their site. Does anyone have a price?
MCummings, I may have to take you up on that offer. Thanks.
JD
You can get a boost fooler here:
http://www.piersdiesel.com/
Bob.
[/quote]
I can't seem to find their fooler on their site. Does anyone have a price?
MCummings, I may have to take you up on that offer. Thanks.
JD
Trending Topics
#8
Registered User
Thread Starter
Join Date: Nov 2003
Location: Northeast, TX
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re:Where can I get a boost elbow at?
[quote author=MCummings link=board=7;threadid=22618;start=0#msg211880 date=1069347242]
What year is your truck?
Merrick
[/quote]
2000
What year is your truck?
Merrick
[/quote]
2000
Thread
Thread Starter
Forum
Replies
Last Post
Common
Performance and Accessories 2nd gen only
10
05-23-2008 05:05 PM
dodgediesel
Performance and Accessories 2nd gen only
14
12-14-2006 09:54 AM
ramz
Performance and Accessories 2nd gen only
5
07-07-2005 07:06 PM
greenwing
Performance and Accessories 2nd gen only
8
02-23-2005 02:50 PM