Out Back 4x4

Ok, i have a leveling kit in the front. The wheels i have are Helo Maxx 8s black 17x10. I'm wanting a good all terrain tire because i do alot of highway driving as opposed to little off road driving. I also tow a little but not much. I was wanting to step up to 35s to get my rpms down a little. Can I fit 35s? If so, what tire should I get?

paroxysym

currently running procomop xats in a 35x12.50 on h2 rims, with a lorenz leveling kit. no rubbing, no problems. you will be fine. search this topic for pics, more info, etc.

BIGDAN65

I am running procomp ex at 35/12.5/20 in 20x9's with 5.4bs no rubbing

jumper

Make sure you get enough backspacing/offset or they will rub. My ProComp A/Ts rub at the outer rear of the fenders on 17" Moto Metals when turned nearly to lock and hitting a bump. More backspacing to bring the wheels inboard would do two things, prevent the rub, and keep from throwing road goop all over the sides of the truck. I just can't see what people like about tires sticking well outside the fender.

snoyes

I ran the BFGs 315s on stock rims with a 2 inch spacer without any issues.

Out Back 4x4

the wheels i have are 17x9. just made sure. and the backspacing is only 4.53. i got a great deal on them and couldn't pass them up. i'm looking at 305/70/17 nitto terra grapplers and they measure 34x12.50. will they work?

Shagginwagon

For no rubbing issues, try to get as close to 6" backspacing as possible (I have 5 5/8") and have a positive offset value (mine is +14mm).

jumper

You'd better mount one up and try it. I'd be reluctant to buy a full set of hard-to-return tires otherwise. Then again, it may be the wheels you unload. Consider as well whether you want the tread rolling outside the fenders throwing that goop around. Notwithstanding the $400 cost of Bushwacker fender extensions, they take up some of that valuable tire/fender clearance you may not have.

norcaljr

I am running a set of 35x12.5x18 Toyo MT's on Ultra 224's with 5.5'' BS and +12mm offset. I have a top gunz custom 2'' leveling kit and dont rub.

CoolumConst

I ran the 315's on H2's without a leveling kit with no rubbing.

D45