Cam/Injector input/help
#1
Cam/Injector input/help
I recently got my head resurfaced, o-ringed, #60 valve springs and ARP 12MMs.
I plan on running a SPS62/12 turbo (or equivalent).
I recently got my injectors pop tested when the head was getting worked and they failed.
I have read on numerous sites about the spray pattern on the 370s.
So what injectors are JUST RIGHT for the stock piston bowl and throw down a lot of fuel?
I plan on running the Helix II cam and next winter I plan on doing a rebuild on the engine and running Mahle pistons but we'll talk about that when the time comes.
So basically I am looking at what Turbo/Injector/Cam combo will work the best?
Helix II; Bolt on gear; $750
SPS 62: $1395
Injectors??
Any input would be appreciated
I plan on running a SPS62/12 turbo (or equivalent).
I recently got my injectors pop tested when the head was getting worked and they failed.
I have read on numerous sites about the spray pattern on the 370s.
So what injectors are JUST RIGHT for the stock piston bowl and throw down a lot of fuel?
I plan on running the Helix II cam and next winter I plan on doing a rebuild on the engine and running Mahle pistons but we'll talk about that when the time comes.
So basically I am looking at what Turbo/Injector/Cam combo will work the best?
Helix II; Bolt on gear; $750
SPS 62: $1395
Injectors??
Any input would be appreciated
#2
Registered User
Join Date: Nov 2006
Location: Western Pa
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
I recently got my head resurfaced, o-ringed, #60 valve springs and ARP 12MMs.
I plan on running a SPS62/12 turbo (or equivalent).
I recently got my injectors pop tested when the head was getting worked and they failed.
I have read on numerous sites about the spray pattern on the 370s.
So what injectors are JUST RIGHT for the stock piston bowl and throw down a lot of fuel?
I plan on running the Helix II cam and next winter I plan on doing a rebuild on the engine and running Mahle pistons but we'll talk about that when the time comes.
So basically I am looking at what Turbo/Injector/Cam combo will work the best?
Helix II; Bolt on gear; $750
SPS 62: $1395
Injectors??
Any input would be appreciated
I plan on running a SPS62/12 turbo (or equivalent).
I recently got my injectors pop tested when the head was getting worked and they failed.
I have read on numerous sites about the spray pattern on the 370s.
So what injectors are JUST RIGHT for the stock piston bowl and throw down a lot of fuel?
I plan on running the Helix II cam and next winter I plan on doing a rebuild on the engine and running Mahle pistons but we'll talk about that when the time comes.
So basically I am looking at what Turbo/Injector/Cam combo will work the best?
Helix II; Bolt on gear; $750
SPS 62: $1395
Injectors??
Any input would be appreciated
#3
Registered User
Join Date: Mar 2006
Location: Eastern Shore of Maryland
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
At set of DDp 3' would be a nice setup with a 62 could possible go with 4's depends on what your doing with the truck. Where in Pa are you guys at I have my engine machining done up in Carlisle pa.
Brett
Brett
#4
Registered User
Join Date: Nov 2006
Location: Western Pa
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
etn550
3rd Gen Engine and Drivetrain -> 2003-2007
4
04-01-2010 12:12 PM
Pleyster
24 Valve Engine and Drivetrain
27
08-04-2009 12:37 AM
Joe Diesel
24 Valve Engine and Drivetrain
1
11-12-2007 08:59 AM