cowboss45

Looking for the inside cab trim. Its plastic and keeps breaking. Any after market trim for this? or what are you guys using to replace it with?
91.5 D250 Color is grey. Thanks for any info.

JustRamIt91

I've repaired this in the past with adhesive. usually a 2-part epoxy that is safe on plastics works the best. Make sure to sand the area generously before you apply and anything that squeezes through the front cut flush with a razor blade when dry. Other than that i suggest painting the pieces as they are usually faded and look much better after.

cowboss45

Will need to hit a junk yard for some that are missing pieces. Thanks for the reply.

CONFEDERATESON

i would also suggest putting some popsicle sticks on the backside to streanghten it further, thats what i did and it is holding up good.

freight train

I agree with confederateson. I used popsicle sticks before over the windshield. Never had a problem after that. And cowboss, we in the field like to call them Salvage yards

cowboss45

Shows my age in not using up to date terms=Sorry

Trooperthorn

I kinda go for the open-air parts warehouse. (AKA Daddy's Disneyland)