a/c problem
06-24-2008, 04:11 PM
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: miami, fl
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
a/c problem
Does anybody have a heads up on the cause of why the lowest setting would not blow? My compressor cycles but no air movement on low. It works fine on every other fan setting.
TIA
Dan
TIA
Dan
06-24-2008, 04:44 PM
#2
Registered User
Has to be the resistor block or broken wire close to the resistor if all the rest work. It could also be that the fan motor has tightened up and on low setting theres not enough power to move it. Spin the motor by hand to test.
06-26-2008, 01:19 PM
#3
Registered User
Join Date: Oct 2005
Location: Central MA
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Have you in fact verified the fan is not spinning on low?
Just because you don't feel air movement doesn't mean it's not moving air...
I don;t feel air movement on my 96 in low, but it works as it's supposed to.
Just because you don't feel air movement doesn't mean it's not moving air...
I don;t feel air movement on my 96 in low, but it works as it's supposed to.
Thread
Thread Starter
Forum
Replies
Last Post
Checkmate
3rd Gen Engine and Drivetrain -> 2003-2007
1
03-05-2005 08:36 PM
callum
Performance and Accessories 2nd gen only
11
11-21-2004 07:04 PM