Boost Fooler
02-11-2010, 12:58 PM
#1
Registered User
Thread Starter
Join Date: Mar 2009
Location: Edmond, OK
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Boost Fooler
Here is a dumb question, but I am confused, how can I run a boost fooler with an edge comp, can I just plug it inline, or what do I need to do or buy??
02-11-2010, 01:21 PM
#2
Registered User
Thread Starter
Join Date: Mar 2009
Location: Edmond, OK
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
And the reason I ask is because my truck isnt making much boost and seems to be in a limp mode because it is pulling the p0234 code which is Engine Overboost Condition. When it runs good in makes about 38 psi, right now only about 18 psi, and running bad.
02-11-2010, 02:58 PM
#3
Registered User
Double check...doesn't the Edge Comp "boost fool" the ECM? If not, then yes you'll need to have the boost fooler installed. Should install inline. If that does not work then you may have a intercooler boot loose/cracked/blown.
Here's an off the wall cool link I just found
http://www.tibor.org/fuel-box.html
Here's an off the wall cool link I just found
http://www.tibor.org/fuel-box.html
Thread
Thread Starter
Forum
Replies
Last Post
Killdmycobra
3rd Gen High Performance and Accessories (5.9L Only)
8
11-12-2010 05:15 PM
Rollin' Smoke
3rd Gen High Performance and Accessories (5.9L Only)
23
06-26-2007 09:04 PM
rkelley
3rd Gen High Performance and Accessories (5.9L Only)
19
01-11-2007 10:59 PM
GTSDave
Performance and Accessories 2nd gen only
4
07-08-2005 09:06 AM
Palmetto_kid
Performance and Accessories 2nd gen only
1
01-16-2004 02:21 PM