2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Blower Resister replacement

Old 12-02-2008, 07:28 AM
  #1  
Registered User
Thread Starter
 
Little-bit's Avatar
 
Join Date: Jan 2006
Location: Wadsworth, Texas
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Blower Resister replacement

My fan for the A/C and the Heater only works on high. Can someone please tell me where the blower resister is?
Thank’s a bunch.
Old 12-02-2008, 08:53 AM
  #2  
Registered User
 
John Faughn's Avatar
 
Join Date: Sep 2004
Location: St Paul , MN.
Posts: 2,888
Likes: 0
Received 0 Likes on 0 Posts
Not sure on that yr. , but they are almost always in the air duct near the fan motor , under the dash , passenger side .
Should be a plug with about 4-5 wires , remove the plug , then a couple screws that hold the resistor holder into the duct , when you pull it out , you'll see what looks like about 4 different springs , at least one would be burnt , indicating a bad one .
Old 12-02-2008, 09:07 AM
  #3  
Registered User
Thread Starter
 
Little-bit's Avatar
 
Join Date: Jan 2006
Location: Wadsworth, Texas
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Cool~Thanks
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jim Lane
1st Gen. Ram - All Topics
14
04-05-2020 06:03 AM
cwoflyboy
2nd Gen. Dodge Ram - No Drivetrain
31
01-27-2018 11:55 AM
beachfisher9
1st Gen. Ram - All Topics
1
08-11-2011 07:23 PM
Copenhagenjunkie
2nd Gen. Dodge Ram - No Drivetrain
2
06-01-2003 04:20 PM
crossy
HELP!
6
11-01-2002 05:16 AM


Thread Tools
Search this Thread
Quick Reply: Blower Resister replacement



All times are GMT -5. The time now is 10:08 PM.