Blocking The Wastegate
#1
Chapter President
Thread Starter
Join Date: Dec 2005
Location: Big Spring (now Stephenville), Tx
Posts: 1,741
Likes: 0
Received 0 Likes
on
0 Posts
Blocking The Wastegate
Ok I tried searching (albiet not for long) on how to block off the HX-35 wastegate (or delay it). I'd like to hit 30+ psi a little easier and longer.
#6
Registered User
Join Date: Aug 2005
Location: Dallas TX
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
Uhh,, what?? I dont agree with these guy's! I have seen more power and better gas mileage by blocking the wastegate! I have a $1.02 plug where the boost elbow is, and got it at Lowes in the plumbing section. I originally had a different style boost elbow I bought at a shop, but this plug works much better and doesnt make my turbo bark like the elbow did.
FYI, It took like 30sec. And gave a definate increase over the elbow adapter!
FYI, It took like 30sec. And gave a definate increase over the elbow adapter!
Trending Topics
#9
Chapter President
Thread Starter
Join Date: Dec 2005
Location: Big Spring (now Stephenville), Tx
Posts: 1,741
Likes: 0
Received 0 Likes
on
0 Posts
I'll never see that kind of boost out of this turbo. (one day either I'll have VG or twins, after the engine is out of warranty and I have that much spare money). If it'll hit mid 30s or stay at low 30s I'll be happy with a quick fix.
#10
Registered User
#13
Chapter President
Thread Starter
Join Date: Dec 2005
Location: Big Spring (now Stephenville), Tx
Posts: 1,741
Likes: 0
Received 0 Likes
on
0 Posts
#14
Registered User
So what can the factory turbo on a 610 see? And is this something the dealer coud find? I need more info on this please. My brother ran a boost elbow on a turbo volvo for years and it made a huge difference. Is it that simple to do on the CTD as well?