Biodiesel and FP Senders
09-02-2007, 08:17 PM
#1
Registered User
Thread Starter
Join Date: Jun 2007
Location: NorCal
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
Biodiesel and FP Senders
Can running bio ruin a fuel pressure sending unit? I ask this because the current FP gauge that I have is slowly showing lower psi and a given rpm/load that it origionally had. I have replace the filter and made sure all was good. Took out the sending unit and installed a mech one and the psi was higher than the origional one was. Now on any given day I can either get 7-8 psi or 9-10 psi running the same way with no load variations. Hope this makes sense. Mainly looking to see if bio will ruin a FP sending unit.
Thread
Thread Starter
Forum
Replies
Last Post
darrenG
Performance and Accessories 2nd gen only
17
09-21-2005 11:01 PM
Bobcat698
12 Valve Engine and Drivetrain
4
09-09-2005 10:54 AM
Superduty
3rd Gen High Performance and Accessories (5.9L Only)
7
07-15-2005 09:33 AM
chucktownsend5
Performance and Accessories 2nd gen only
3
08-01-2004 01:17 PM
