big wiring problems
#1
big wiring problems
Ok so I.started puting the truck back together and I started messing with the wires and there are not wires just laying in there that don't go to any thing or are cut in so many diffrent places. Is there any place that has an after market wiring harness for under the hood or do I have to try and fix this mess. Pictures coming soon.
#2
Registered User
Join Date: May 2004
Location: Weatherford, TX
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
This is where im at. I got ****** off and cut all the wiring out under the hood. I might try to build my own harness cause Im getting aftermarket gauges. But this all has to wait till it cools down.
#4
Registered User
I can't see why everyone is so in love with a factory wiring "harness"; they are way under-wired and are why there are so many electrical issues in the first place.
Equip yourself with a bunch of quality wire in bigger sizes than the factory used, some solder, a good heavy set of crimpers, a bunch of heat-shrink, and you will be an expert in no time at all.
Electrical is easy.
Equip yourself with a bunch of quality wire in bigger sizes than the factory used, some solder, a good heavy set of crimpers, a bunch of heat-shrink, and you will be an expert in no time at all.
Electrical is easy.
Thread
Thread Starter
Forum
Replies
Last Post
wyododge
Performance and Accessories 2nd gen only
4
01-13-2009 02:25 AM
melease
3rd Generation Ram - Non Drivetrain - All Years
3
02-12-2008 10:00 PM
charcoal600
Towing and Hauling / RV
2
04-30-2005 02:34 PM