Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Bhaf!

Old 02-26-2008, 02:38 PM
  #1  
Registered User
Thread Starter
 
btown647's Avatar
 
Join Date: Sep 2007
Location: Buford, Ga
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Bhaf!

i would like one and i have i need to know where i can get one. and how to install it i have a list of part #s for them. but i would like to know if i can walk into advance or napa and get one any help would be much abliged.
Old 02-26-2008, 02:44 PM
  #2  
Registered User
 
fmxr47's Avatar
 
Join Date: Feb 2008
Location: seville ohio
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
napa has them in stock, i dont remember the number though.
Old 02-26-2008, 02:49 PM
  #3  
Registered User
 
xtoyz17's Avatar
 
Join Date: Nov 2006
Location: Rochester, NY
Posts: 2,333
Likes: 0
Received 0 Likes on 0 Posts
www.fleetfilter.com

Should be able to get it for $50 shipped or less IIRC.
Old 02-26-2008, 02:53 PM
  #4  
Registered User
Thread Starter
 
btown647's Avatar
 
Join Date: Sep 2007
Location: Buford, Ga
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
thanks now how do i install and is heat sheild a must
Old 02-26-2008, 03:06 PM
  #5  
Registered User
 
xzaq103's Avatar
 
Join Date: Jan 2007
Location: Fayetteville AR
Posts: 625
Likes: 0
Received 0 Likes on 0 Posts
Remove the stock airbox. The Bhaf slides on the intake tube. i just let it sit there on my 98.5. As for a heat sheild i would say no. I never had an issue with not having one.

Chris
Old 02-26-2008, 03:12 PM
  #6  
Registered User
 
HOHN's Avatar
 
Join Date: Apr 2003
Location: Cummins Technical Center, IN
Posts: 6,564
Likes: 0
Received 6 Likes on 5 Posts
The NAPA P/N is 2790, IIRC.

I paid $60 for mine back in the day.
Old 02-26-2008, 04:06 PM
  #7  
Registered User
 
high bid's Avatar
 
Join Date: May 2007
Location: Sarasota, FL
Posts: 2,158
Received 8 Likes on 8 Posts
install a cut rubber hose over the a/c line that the filter rest on....if not it will wear thru the aluminum line and you'll loose your a/c freon.
Old 02-26-2008, 06:27 PM
  #8  
Registered User
 
afoulk's Avatar
 
Join Date: Jun 2007
Location: Schaefferstown, PA
Posts: 743
Likes: 0
Received 0 Likes on 0 Posts
You can get a Donaldson one from Vulcanperformance.com for $38 and some change. The heatshield isn't a must, but I made one anyways and painted it with high temp paint. I also cut a piece of old mudflap out that I got from work and laid it on my fender so that the filter didn't rub through the a/c line or the paint on my fender. Vulcan also has the Outerwears pre-filters for the BHAF too if your interested.
Old 02-26-2008, 06:39 PM
  #9  
Registered User
Thread Starter
 
btown647's Avatar
 
Join Date: Sep 2007
Location: Buford, Ga
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
thank you much
Old 02-26-2008, 06:43 PM
  #10  
Registered User
 
blitz_81's Avatar
 
Join Date: May 2006
Location: Austin, Tx
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
about hopw long do they last.I have had mine on for about 10k and it looks pretty dirty. was wonderin how long ya'll leave them on for.
Old 02-26-2008, 06:51 PM
  #11  
Registered User
 
xtoyz17's Avatar
 
Join Date: Nov 2006
Location: Rochester, NY
Posts: 2,333
Likes: 0
Received 0 Likes on 0 Posts
Mileage may vary, biggest thing that helps is a filter sock over it to catch a lot of the bigger stuff. Mine has 10k and looks new still.
Old 02-26-2008, 09:39 PM
  #12  
Registered User
 
hink's Avatar
 
Join Date: Apr 2006
Posts: 695
Likes: 0
Received 0 Likes on 0 Posts
A heat shield is not a must, but my EGT's went up about 75 degrees across the board even with a heat shield installed.
Old 02-26-2008, 09:46 PM
  #13  
Banned
 
Vern Calhoun's Avatar
 
Join Date: Sep 2007
Location: Copperas Cove, Texas
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
That's wierd, my EGT's went down almost 100 degrees at WOT, and that's with my 100hp injectors. Different strokes for different folks I guess. Just my 2 cents.

Vern
Old 02-26-2008, 09:49 PM
  #14  
Registered User
 
hink's Avatar
 
Join Date: Apr 2006
Posts: 695
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Vern Calhoun
That's wierd, my EGT's went down almost 100 degrees at WOT, and that's with my 100hp injectors. Different strokes for different folks I guess. Just my 2 cents.

Vern
That's kinda the general consensus I had read before installing mine, so I was surprised to see them (egt's) go up instead of down.
Old 02-27-2008, 01:13 PM
  #15  
Registered User
Thread Starter
 
btown647's Avatar
 
Join Date: Sep 2007
Location: Buford, Ga
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
where can i pick up a prefilter or can i make my own?

Thread Tools
Search this Thread
Quick Reply: Bhaf!



All times are GMT -5. The time now is 05:06 PM.