psalm69

Any ideas on making an '01 2500 4X4 handle better? I like a good stiff ride and would also like to remove some of the sway. What have you guys done to make your trucks a little more car like in that way?

BigBlue

The best thing I can think of, I've asked this question a couple of times, is new shocks and polyurethane bushings. That's about all that can be done. The stock shocks suck. Period. I'd go with either a set of Ranchos or Bilstiens (sp).

dsldan

Make sure there is plenty of air in the tires........................

jaconst

I'd try lukes link for your tie-rad and trac-bar ends and look into a steering stabilizer kit I can't remember who sells it maybe DT? go to links and check out what the cos offer.

gsdog1

When I lifted the truck, I opted for dual shocks up front, after market steering stabilizers, and trac bar. Huge difference!

Matt

dodgeram

I put skyjacker d25 springs and dual shocks on the front ............. tightened her right up handles awsome now

psalm69

I may look into doing some of those mods. Thanks fellas.

dodgediesel4x4

A dual steering stablizer kit would do the trick. Gets rid of the play, for the most part, in the "loose" steering. I think you would notice a big difference.

DodgeCowboy

belive it or not when i installed my hellwigs and set them to the max it lifted the rear of my truck a good 1" and it dramaticly took the roll and sway out of her