Bd Super Special And Hamilton
#1
Registered User
Thread Starter
Join Date: Jun 2008
Location: Roseburg Oregon
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
Bd Super Special And Hamilton
wondering who is running this. next week my truck will be fixed, all new pistons, bearings hamilton cam and springs, and with bd super special. with my 150 mach's and smarty wondering how spool will be. also for those who have this turbo what are you seeing rpm wise when it hits. thanks
#2
Registered User
Join Date: Aug 2005
Location: Airdrie, Alberta
Posts: 7,780
Likes: 0
Received 0 Likes
on
0 Posts
My turbo on my 12v hits at around 1700. Thats on a stock cam. On my 24v, when I had a stock cam and a silver bullet, it would hit at 2k. After the 181/210 cam, it spooled a good 200 rpm earlier.
#4
Registered User
Join Date: Aug 2005
Location: Airdrie, Alberta
Posts: 7,780
Likes: 0
Received 0 Likes
on
0 Posts
I'm pretty sure this is an older bullet with the 71mm turbine. Either way, it was to give a comparison in the RPM difference pre-cam and post cam on the same engine, as well as what the turbo you are asking about lights at on a similar engine.
#5
Registered User
Thread Starter
Join Date: Jun 2008
Location: Roseburg Oregon
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
thanks again buddy, there are some really good down to earth diesel breathers out there to help out and your one of them. thanks. let everyone know once everything is together.
Thread
Thread Starter
Forum
Replies
Last Post
gecoveyc
3rd Gen High Performance and Accessories (5.9L Only)
1
07-01-2011 04:25 PM
whatsup1287
Performance and Accessories 2nd gen only
11
06-25-2009 02:59 PM
Diesel Dave2
Performance and Accessories 2nd gen only
16
12-20-2008 07:11 PM
oaborbag
Performance and Accessories 2nd gen only
7
03-20-2008 10:55 AM