PDA

View Full Version : Autometer Gauges


Hardrider5
11-09-2002, 02:32 PM
Just recieved my pillar mount &amp; three gauge setup from Geno's. The EGT &amp; Boost are straight forward installations but I need to know of other options for installation of trans temp gauge. Guage came with a sending unit they recommend to have a nut brazed to the trans pan for installation. What other options are avaliable to pickup trans temp?<br>

danlit
11-09-2002, 04:11 PM
A nice new DoubleDeep MagHiTek Pan it has the hole for the probe in it already<br> Danny

chuck3
11-09-2002, 07:21 PM
There's some plugs at the rt side of pan that I used untill I got my DD Mag-Hytec pan.

Lary Ellis (Top)
11-09-2002, 09:29 PM
Replace the cooling line with one that has a manifold on it for the temp probe. Gives a much more accurate reading of the temp coming off that transmission before it mixes with the cool fluid. It also get's rid of the plastic quick connect fittings.<br> Do a search on here for transmission temp guage, you should come up with the info that way. If not send me a message and I will get you the part numbers.